So managed to sort a Apexi GT intercooler I just need to sort the pipework from the turbo side (stock twins) to the intercooler and as I have no engine in the car or the intercooler yet it may prove difficult!
Any one have one fitted I can get the angles and pipe work length from?
Thanks in advance
[/QUOTE]

 

I don't know about the angles on the routing you showed, but this is how I did it.

I put a 90 degree coming off the y-pipe, then used two 45 degree bends to get to the intercooler. My intake is the HKS RS, and I used K&N filters.

Hope that helps.

 

ah ok, I'm using the Apexi filters also like in my photo so not sure it will work but thanks, i am also using a Koyo rad does this just sit like the stock one?
great looking car BTW

 

I think so. I didn't have the brackets for the rad, but the bottom went in the same place as in the OEM configuration, I believe, and then I made a couple brackets to hold the top.

 

Bump

 

anyone else running this IC with stock pipe work?