I would like to have some pics of a Apexi FMIC, Ive seen two different ones, one with the pipes at the sides and one with bouth pipes on top going backwords, the last one is most interresting. Who sells those?

Attatch pics please.

 

go to rx7store.net and take a look for yourself

 

Ive done that but they dont have the one with the pipings on the top going backwords.

 

Here ya go.



Jason
www.rx7store.net

 

Thats the one they got on rx7store. the other one fits without moving the radiator

This is a pic with it installed but I need pics of it outside when it is not in the car.

 

one more, no one who knows whose selling these?

 

You'd be looking for this then.

http://www.rx7fashion.com/intercooler.htm

 

The GTR core???

 

yeah heard it has mad pressure drop... dunno though (see it to believe it) I have pics of my apex'i FMIC in the photo gallery. search for wonder1and.
Ryker

 

Thats it, thanks!

 

get the core and fab the endtakes and pipes yourself. I wish XS still made their kit.

 

I havent thought about that before, but I think you right.

Maybe better going with the other design. Is it difficult to lift up the radiator? How do I do it?

Thanks.

 

Are all those pipes included in the apexi kit on Jasons picture. Especially the 2 blue pipes.
Thanks

 

Yea The pipes in the pic come with the intercooler kit along with the intake system in that pic.

Jason
www.rx7store.net

 

By looking at that intercooler, the end tanks are horrible. The XS kit was much nicer, look at their website http://www.xs-engineering.com/asp/index.asp it's much better designed. Jason, since your an Apexi dealer, can you purchase the GTR core, and have the end tanks fabricated? I'm sure they would sell.

eric

 

Do the intake pipes come in any other color besides blue?

 

Ive been doing some research and notised that there is a brace going in the front, see the Attattchment and compare it with the silvercoloured car above that got the apexi core in the front.

Have they cut the brace away? or can it be taken away easy? Does it affect anything?

Thanks.

 

yeah, it has to go. i just put a tsf intercooler (http://turbostreetfighter.com/html/cooler.htm) on my car. had to take off the reinforcement bar and that piece of metal. its ok as long as you dont hit or get hit from the front, eeek! saves some weight too. i'll get pics asap

 

WOW! Thats a setup I like. I really would like more pics.


Ive decided now to make one of my own, I have got two saab 9-3 intercoolers (the core can handle 200-250Hp each) wich will be welded together as one pice, full aluminium IC. The att. is a pic of one saab IC. It will be a highly affordable IC, Ive got the two saab IC for 100$.

 

You are very observant.

Not only do you have to remove teh fiberglass like reinforcement that holds up the bumper, but you also have to remove that structural reinforcement that's shown in your picture. This is kind of bad, because now after installing the fmic, it's the ONLY thing connected both sides. The IC basically has now become part of the structure of your car.

 

I totally forgot about that IC they made, post some pics when you get them, I'd be really interested in seeing them. Thanks.

 

But using the IC as a reinforcement could not be a good thing, I dont think the IC will hold up for to long.

Hmm....... This IS a problem. Im not really happy cutting in my chassi. Perhaps it will be enough to just cut away some material in the bottom of tha brace and place the IC underneath/behind. I think I have to lift up the radiator a bit anyway cause the total IC core will be over 4" thick.

 

here you guys go....

 

#2

 

and finally for your veiwing pleasure...