I removed the pins from the plugs for the solenoid and the map sensor from my AVCR so i could put them through the firewall, i made the mistake of assuming that wire colours would be the same colour on each side of the plug. Could someone with a Apexi AVCR please tell me the order of wires on the plugs. should be 3 wires on the map sensor and 2 on the solenoid.

 

are you using the new one? btw, a little off subject but how much did you pay for it?

 

yep this is the newer one the one with the blue screen. i paid 750AUD

 

anyone?

all i ask is if you have a AVCR, is if you can check your plugs to see where each wire goes

 

Since you have question about the AVC-R. I have one too. I was wondering about the connection to the Pressure Sensor. I m doing an installation of AVC-R on my FD, and i think i m almost done; but i just don't know how to connect the pressure sensor with the engine's part?

In the diagram, it show connection between the Pressure Regulator and the Surgetank, and i just don't know where should i install at ????

Thax Sindy

 

use a t-piece supplied and and t it into the mab sensor vacuum hose.

Now back to the orginal question

 

ill crawl under there and look tommorrow. i figure i owe you one.

 

ahh thanx, thought would be much appreciated

 

Are you meaning the wires on the pressure sensor to the plug ???
Pink, Gray, and White
Yellow, Purple, and Blue

 

yeh sorry didn't word it very well.


which wire matchs the wire on the other side of the plug?

that goes for the map sensor plug and the solenoid plug

 

Like what i did.....
Pink to Yellow; Gray to Purple; White to Blue

i don't know, it is work on yours or not.... because i m not quite sure you are talking about the "Plug to Map Sensor" or " The Plug to the Pressure Sensor"

If you want i could make a picture for you.... about that, and i think picture will help more than words.... I need to go to my friend house and take her DC, okey

thax Sindy

 

yea i will take a pic this afternoon. that should clear up all the confusion.

 

Sindy, and JMunilla94RX7

that's what i meant. though a photo would be good as well

many thanx

 

 

just what i'm looking for. Thank you!

now i can finally set this thing up

 

glad to hear it. good luck!

 

okey.... good for you....
i can return the DC to my friend....hehe