3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Anyone see the Hell Rott Red NX RX7 on the cover of Super Street? Over 800hp...

Thread Tools
 
Search this Thread
 
Old Feb 9, 2004 | 03:31 PM
  #1  
ArchangelX's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Nov 2002
Posts: 792
Likes: 0
From: Oahu, Hawaii
Anyone see the Hell Rott Red NX RX7 on the cover of Super Street? Over 800hp...

Anybody see it? Owned by Brian Havins with over 800HP with a Thumper Series T88 turbo and a direct port of NX's nitrous system.

Here's the engine specs:

13B rotary motor, custom intake;96-pound injectors(x2), 160-pound injectors(x2);Aeromotive fuel pumpe and regulator;custome NX fuel rail;Accufab 90mm throttle body;Tanabe Super Medallion exhaust;MSD spark plug wires;Headway Performance T88 Thumper turbo; Turbo XS blow-off valve; Turbonetics wastegate; custome intercooler and piping; 3.5-inch downpipe; Fluidyne radiator; NXL direct port nitrous; Microtech engine management.

I just picked up the mag, and that's pretty crazy. The entire interior has been redone in carbon fiber...and I mean everything. It looks totally different....I think it's a much better cover car than the huge orange thing that was on one of the other mags I saw.

Just how much can you HP can you add with nitrous on a single turbo'd 13B-REW? It seems to have been built up by Headway Performance. Anyone heard of these gents?

I'll post pics soon...er..as soon as I get my stupid scanner to work.
Reply
Old Feb 9, 2004 | 04:02 PM
  #2  
Mitch529's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: May 2002
Posts: 373
Likes: 0
From: St. Pete, Fl
I saw it, pretty sweet. He went a little wild with the carbon fiber...

Here is the article.
Attached Thumbnails Anyone see the Hell Rott Red NX RX7 on the cover of Super Street?  Over 800hp...-hell-rot-red.jpg  
Reply
Old Feb 9, 2004 | 04:03 PM
  #3  
DomFD3S's Avatar
Mod Powers...gone!
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 1,522
Likes: 1
From: SoCal
http://www.superstreetonline.com/fea...0_0402_nxfd3s/
Reply
Old Feb 9, 2004 | 04:14 PM
  #4  
SpeedKing's Avatar
Power Trippin'
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 3,128
Likes: 1
From: Land of The Quick


Reply
Old Feb 9, 2004 | 04:15 PM
  #5  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
The usual bodykit mods to make the car look like ***.

BTW, they don't even have the car running. The article says it SHOULD make over 800 rwhp to the wheels. Big deal. How about writing the article once the car has actually been tuned and to the dyno.
Reply
Old Feb 9, 2004 | 04:26 PM
  #6  
lopedl's Avatar
Forever Modified
Tenured Member 10 Years
iTrader: (1)
 
Joined: Dec 2003
Posts: 1,423
Likes: 0
From: WA
Originally posted by SpeedKing


Who the hell is that guy the Karate Kid
Reply
Old Feb 9, 2004 | 04:38 PM
  #7  
SPOautos's Avatar
Hey, where did my $$$ go?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 4,413
Likes: 0
From: Bimingham, AL
Yea, call me when you have a 800rwhp dyno sheet. They still have the stock uim and lim on it lol. THey must be spraying a 200 shot on top of the 30 psi of boost lol

STEPHEN
Reply
Old Feb 9, 2004 | 04:38 PM
  #8  
artguy's Avatar
WTB** Very Low Miles 94-95
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 3,298
Likes: 0
From: Tejas
Got Rice?


Butcher!
Reply
Old Feb 9, 2004 | 04:45 PM
  #9  
johnisenglish's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 448
Likes: 0
From: Greensboro / Charlotte NC
Holy crap I thought SpeedKing had photoshopped that guy in, until I went to the website...

...WOW...

And with the interior - you'd think you'd get tired of all that Carbon Fiber after a while?

Last edited by johnisenglish; Feb 9, 2004 at 04:47 PM.
Reply
Old Feb 9, 2004 | 04:48 PM
  #10  
jdhuegel1's Avatar
Glug Glug Glug Burp
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
I've GOTTA get me one of them there TaCHometErS! LMAO
Reply
Old Feb 9, 2004 | 04:55 PM
  #11  
PVerdieck's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: May 2002
Posts: 1,742
Likes: 0
From: Houston
I hope those turkeys are still running the stock diff. I would pay money to see them frag it
Reply
Old Feb 9, 2004 | 05:06 PM
  #12  
jdhuegel1's Avatar
Glug Glug Glug Burp
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
Originally posted by PVerdieck
I hope those turkeys are still running the stock diff. I would pay money to see them frag it
It's most likely ALL stock from the flywheel back... I mean... look at it. Looks like he just wants attention if you ask me..
Reply
Old Feb 9, 2004 | 05:06 PM
  #13  
c00lduke's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 2,360
Likes: 0
From: Overland Park, KS
is that even possiable with 960cc primaries and 1600cc 2nd?
Reply
Old Feb 9, 2004 | 05:23 PM
  #14  
SkywarpR's Avatar
$ pit on wheels...
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 262
Likes: 0
From: Bay Area, Ca
I'd like to know how many REAL 800hp FD's exist in this country
Reply
Old Feb 9, 2004 | 05:24 PM
  #15  
moehler's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (12)
 
Joined: Mar 2003
Posts: 2,319
Likes: 32
From: South Jersey
all that money into the car and he's got a 15 e-bay strut bar ...
I don't think it's possible to put down 800 rwhp with the stock uim and lim... please. Also, 800 rwhp on those wheels... he wont grip until 4th gear!?
Reply
Old Feb 9, 2004 | 05:35 PM
  #16  
0110-M-P's Avatar
Too Many Projects
Tenured Member: 20 Years
iTrader: (10)
 
Joined: Feb 2003
Posts: 1,410
Likes: 2
From: Atlanta, GA
Ahhhh.....gauge in the door panel. Thats new to me. haha. Not a fan of it and that doesn't look like any other t88's i have seen, at least made by Greddy.

edit: yea i looked again and it said something about it being a super thumper t88
Reply
Old Feb 9, 2004 | 05:51 PM
  #17  
Jason's Avatar
The one
iTrader: (5)
 
Joined: Jul 2001
Posts: 3,862
Likes: 5
From: Fort Worth, TX
man you guys are harsh

Jason
Reply
Old Feb 9, 2004 | 05:55 PM
  #18  
Fumanchu's Avatar
Belligerent Security
Tenured Member 10 Years
 
Joined: Jul 2003
Posts: 70
Likes: 0
From: Pulling you over
pretty childish if you ask me.
Reply
Old Feb 9, 2004 | 06:08 PM
  #19  
93 R1's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 1,734
Likes: 0
From: maryland
Originally posted by 0110-M-P
Ahhhh.....gauge in the door panel. Thats new to me. haha. Not a fan of it and that doesn't look like any other t88's i have seen, at least made by Greddy.

edit: yea i looked again and it said something about it being a super thumper t88
Actually the "thumper" series isn't made by Greddy
Reply
Old Feb 9, 2004 | 06:14 PM
  #20  
vosko's Avatar
Just Call Me Terminator!
Tenured Member 15 Years
iTrader: (4)
 
Joined: Feb 2001
Posts: 7,848
Likes: 0
From: NJ
i think it needs a bigger speedometer and what is going on with the throttle body ?
Reply
Old Feb 9, 2004 | 07:43 PM
  #21  
Sprockett's Avatar
Former Rotorhead
Tenured Member 05 Years
 
Joined: May 2002
Posts: 1,926
Likes: 0
From: Midland, MI
I wonder.....30psi??? That seems almost impossible on an FD. I could be way off, but seriously...30psi? that's 2 bar! I mean, for a SHOW CAR it isn't bad...but it won't make 800HP. I wonder if he's on the stock ECU
Reply
Old Feb 9, 2004 | 07:52 PM
  #22  
20B Junkie's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 390
Likes: 0
From: Canada
Originally posted by SpeedKing


LOL.....yeah thats
Reply
Old Feb 9, 2004 | 08:05 PM
  #23  
oppressor666's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Feb 2002
Posts: 111
Likes: 0
From: Albuquerque, NM
Nope I didn't Think so.....Not enough fuel for 800RWHP, He would have to run them at like 120% Cycle duty to squeeze out enough, anyways that is according to the Fuel Calculator on RX7.com.
Besides that the front lip almost looks like it is bent up a little, Hate to see that thing at Triple digit speeds.
Marc
Reply
Old Feb 9, 2004 | 08:11 PM
  #24  
Godzilla-T78's Avatar
Banned. I got OWNED!!!
 
Joined: Jun 2003
Posts: 1,619
Likes: 0
From: Central Florida
All I have to say.. if he is making 800hp.. he sure is running some small injectors for the claimed power.. Thats only what.. 5200-5300cc a min? Thats comparable to 2x950cc and 2x1600cc Maybe its me but I dont see that being near enough for that much power and then having enough fuel to keep the mixture rich for his nice direct port.. I think karatee queer boy is where he deserves.. in the famous magizine..Stupid Street..
Reply
Old Feb 9, 2004 | 09:04 PM
  #25  
fastcarfreak's Avatar
3rd motors a charm I hope
Tenured Member 15 Years
 
Joined: Apr 2003
Posts: 2,054
Likes: 0
From: Central New York
I believe some nitrous systems have there own fuel lines. I hate the sleek headlights with the 99 spec signals. It just looks wierd if you ask me. Then again, im not really a fan of the sleek headlights anyways. They look out of place.
Reply



All times are GMT -5. The time now is 02:28 PM.