supraturbo1987

iTrader: (4)

First off, I searched and didn't find any info on this company, so I thought I would share in hopes it would be beneficial to someone else. I found a company called Hi Performance Store (ironically enough they advertise on the forum via Google Ads...which I JUST now noticed) that sells a very high quality silicone vacuum hose kit for the FD. I was going to go with Hose Techniques, but when I called them, they didn't have enough hose to make a complete FD kit and were about 4-6 weeks out (kinda weird for a company that specializes in silicone hose kits...kind of like Famous Dave's running out of ribs)

I found the kit on eBay originally, but here is the site:

http://www.hiperformancestore.com/Mazda.htm

Anyways, the kit is fantastic, it is very thick walled silicone hose and you get PLENTY of it, and really lots of extra to come in handy down the road. Each hose size group is labeled with a letter of the alphabet and they explain which letters (or size that letter represents) is used for; i.e. size A is used for all solenoids. It was also nice that they send a little welcome packet with the turbo flow diagram, colored vacuum hose diagram for regular sequential twins and the colored diagram for the simplified sequential twins. I really liked that extra touch just because it made me feel like I didn't just get some generic kit, but one that was truly geared towards my specific car. Anyways, hopefully this is a little incentive or comfort for those needing a kit or already considering this one. It also comes with a nice cutter and installation lubricant.

Trev

R(X7)sario

iTrader: (1)

That is an amazing kit, bookmarked, and right in time too! I have a hose with some seapage and wasn't thrilled about chasing down just the one.

supraturbo1987

iTrader: (4)

You will be very glad you did the whole install. It is quite a bit of work, but take your time and you will be fine. It was scary to find how many of my lines were either loose, cracked or completely broken in half! No wonder I could only boost to 5 in primary and nothing more. Good luck!

Trev

limepro

iTrader: (2)

I am ordering this as soon as i get home, thank.you so much for putting this out there.

existanzrx7

iTrader: (8)

Nice!!

DaleClark

iTrader: (55)

Looks good! BTW, the Hose Techniques RX-7 kit gives you WAY more than you need.

The biggie for me on silicone kits -

- MUST be 3.5mm hose diameter on the smaller stuff. 4mm or some standard size doesn't fit tight. It should fit nice and tight and be difficult to pull off. With good silicone hose you don't need to use zip ties or any foolishness, they grip tight enough to do all the work.

- Thick walls so it won't kink in bends. Some stuff has really thin walls and easily kinks in some of the tighter bends in the rat's nest. The thin stuff is also more prone to ripping and tearing.

Dale

limepro

iTrader: (2)

on their ebay page the stuff looks pretty good




I will know when I actually get the stuff.

supraturbo1987

iTrader: (4)

^^^

I can verify these pics are accurate as far as the thickness of the walls.

Trev

Sgtblue

iTrader: (16)

That's a pretty good price for good hose.

And I would still zip-tie the pressure lines.

supraturbo1987

iTrader: (4)

I did forget to mention this, thanks Jim. Just extremely cheap insurance whether you think it needs it or not. I am stocked full of zip ties. Heck, when you are into it this far (I am also replacing my vacuum and pressure chambers amongst many other things) you should take your time and do it right I have learned over the years.

Trev

yoojeankim

iTrader: (13)

Is there any update of this company? Been trying to buy from hose techniques but they've been out for almost 2 months

limepro

iTrader: (2)

The hose is great, very good quality and fit. Has plenty for all applications and It fits on very tightly. My car is being done right now, we thought we were going to need hose for the blow off as it is re-routed to the front but the hose size needed for this was in the kit. This kit has everything needed and great quality, I would recommend it. Of course I don't know yet how it holds up to heat but it says that it is true silicone so it should do good.

DaleClark

iTrader: (55)

I needed to get some more hose for a buddy's engine I'm rebuilding and ran in to the same issue - Hose Techniques is out of stock. They're supposedly relocating the business and won't have any for a while and are taking a waiting list. That's pretty lame.

So, I googled around, found this -

Pure Silicone Vacuum Hose : BoostController.com LLC - America's Source for High quality turbo boost controllers, silicone hose, and more performance products - 877-836-6155- precision boost control. Turbosmart Warehouse Distributor

Their price is about HALF of Hose Techniques. After I got it in I compared it to the HT hose - same wall thickness, same resistance to kinking. Outside felt a little different, a little slicker, but no biggie there.

The engine hasn't run yet so I don't have long-term results in a hot environment but it looks promising. I never buy "kits" of hose, you just end up with WAY more than you need.

Dale

jayscoobs

iTrader: (8)

I just bought the silicone hoses that Dale just said. Im on waiting list for Hose Techniques but that was last week. Trying to get car running so went with these. Lets see if their up to the task.

yoojeankim

iTrader: (13)

now im debating on both.. the hiperformance kit looks promising

yoojeankim

iTrader: (13)

megh just ordered hiperformance ill give ya an update

a31cefiro

iTrader: (1)

so.. any updates on this kit?

Sgtblue

iTrader: (16)

The OP has since sold the car but it's still in the area. The new owner lives near me and AFAIK, it's running fine.

seven1997

iTrader: (2)

I use:

Flex Technologies - Your Silicone Hose Solution

3.5mm and 6mm
Good quality and a lot less expensive than than hose techniques

a31cefiro

iTrader: (1)

Thanks.

a31cefiro

iTrader: (1)

Thanks, will look into it.


Bah sorry for double posting.

limepro

iTrader: (2)

Ran it on my car no problems with the first kit posted and still have a bunch left. Have since gone non-seq.

DaleClark

iTrader: (55)

The Boostcontroller.com hoses I posted up about work great. I've used a good amount of it now, it's quality, fits good, holds up great.

I give it my stamp of approval. Price is fantastic too.

Dale

a31cefiro

iTrader: (1)

I ordered my hoses from boostcontroller.com as well. 95 dollars compared to a 180 dollar kit! Thanks for your suggestion on their site.

ncaudio

iTrader: (14)

Dale, since you are the knower of all things RX7, how much of what size is needed to rehose a stock FD. I'll probably buy bulk, but want to make sure I have enough on hand, thanks