It is always something when things are going good!
07-05-05, 08:01 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2005
Location: Indiana
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
It is always something when things are going good!
Ok, I am down to the oil cooler, (which by the way is severly pelted closed), but the hoses are siezed to the fitting. I pulled the clamps, but them babies are stuck solid. Anyone suggest a trick to coaxing these bad boys free?
07-05-05, 08:36 PM
#2
My name is Ted-E
Join Date: May 2005
Location: Sunny SoCal
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
just cut them off with a knife as close as you can to the fitting and then cut off the remaining part that's stuck to the fitting. You might as well scrap them for new hoses since you're changing it anyway.
07-05-05, 08:38 PM
#3
BOOOYAHHHH!
Originally Posted by FormulaRX
just cut them off with a knife as close as you can to the fitting and then cut off the remaining part that's stuck to the fitting. You might as well scrap them for new hoses since you're changing it anyway.
Thread
Thread Starter
Forum
Replies
Last Post
tallbozo
1st Generation Specific (1979-1985)
3
08-15-15 02:47 PM