OK so I've bought the RX7Store Extreme Fuel System. I have a basic idea of how it goes together, but just want to double check. I am probably second guessing myself, but it is better to be safe than sorry.

Does anyone have a picture of there rail and FPR before going onto the LIM so I can verify that I have all the fittings where they belong? Some install pics might be beneficial too.

Also is there anyone who sells the injector spacers? or a write-up on how to make 'em

I searched but had no luck.

Thanks for the help.

 

^

 

www.KGParts.com and look under fuel, and DIY for spacers.

 

Thanks, but I'd already found that link on another site. It doesnt provide any pictures of the secondary rail only the primary.

I hadn't found the spacers though. That makes life a lot easier.

 

Looking at the links on that page...you would have found this link which I beleieve is what you are looking for. http://www.3rdgenrx7.com/keithshowto.htm

 

I did find that, and they are the directions I followed. However, it does not show any pictures of the 2ndary rail with all the fittings; only the primary. I just wanted to double check to make sure my reading and comprehension skills are up to par.

 

Josh,
Give me a call and I will talk you thru it.

Jason