Aftermarket Secondary Fuel Rail and FPR
#1
Wouldn't Go If U Paid Me
Thread Starter
Join Date: Nov 2003
Location: Clayton, NC
Posts: 3,036
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Secondary Fuel Rail and FPR
OK so I've bought the RX7Store Extreme Fuel System. I have a basic idea of how it goes together, but just want to double check. I am probably second guessing myself, but it is better to be safe than sorry.
Does anyone have a picture of there rail and FPR before going onto the LIM so I can verify that I have all the fittings where they belong? Some install pics might be beneficial too.
Also is there anyone who sells the injector spacers? or a write-up on how to make 'em
I searched but had no luck.
Thanks for the help.
Does anyone have a picture of there rail and FPR before going onto the LIM so I can verify that I have all the fittings where they belong? Some install pics might be beneficial too.
Also is there anyone who sells the injector spacers? or a write-up on how to make 'em
I searched but had no luck.
Thanks for the help.
Last edited by JMunilla94RX7; 01-16-05 at 07:06 PM.
#4
Wouldn't Go If U Paid Me
Thread Starter
Join Date: Nov 2003
Location: Clayton, NC
Posts: 3,036
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, but I'd already found that link on another site. It doesnt provide any pictures of the secondary rail only the primary.
I hadn't found the spacers though. That makes life a lot easier.
I hadn't found the spacers though. That makes life a lot easier.
#6
Wouldn't Go If U Paid Me
Thread Starter
Join Date: Nov 2003
Location: Clayton, NC
Posts: 3,036
Likes: 0
Received 0 Likes
on
0 Posts
I did find that, and they are the directions I followed. However, it does not show any pictures of the 2ndary rail with all the fittings; only the primary. I just wanted to double check to make sure my reading and comprehension skills are up to par.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM