Does anyone have a link to someplace that has a how to for installing an aftermarket oilcooler?
I was able to seprate the oillines from the oilcooler via the quickdisconnects but im not sure how i would connect them to an after market one, do you cut the rubber lines and fit somekinda fitting on there? I think i read somewhere that you need -10an line fittings or something. anyone got any clue on this

thanks

 

Here is some info on the Crooked Willow Racing kit:
http://www.maxcooper.com/rx7/parts_i...lers/index.htm

It replaces all the rubber and hard lines with AN-10 SS braided hoses. It comes with ducts, coolers, brackets, and a thermostat (the stock t-stat is in the LH oil cooler).

Rotary Extreme also makes an oil cooler kit.

-Max