accelerated warm up house and the greddy elbow
04-26-04, 11:48 PM
#27
Originally posted by rynberg
you guys should read Max Cooper's write-up on this subject. BTW, he actually ended up just plugging it and hasn't experienced any more problems (at least that was what he said the last time this post came up...). Maybe Max will chime in.
http://www.maxcooper.com/rx7/parts_info/ic/index.html
(scroll down most of the way to the bottom)
you guys should read Max Cooper's write-up on this subject. BTW, he actually ended up just plugging it and hasn't experienced any more problems (at least that was what he said the last time this post came up...). Maybe Max will chime in.
http://www.maxcooper.com/rx7/parts_info/ic/index.html
(scroll down most of the way to the bottom)
-Max
04-27-04, 07:38 AM
#28
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally posted by fstfwd
Yeah it's Steve... is that you Petrocelli?
Yeah it's Steve... is that you Petrocelli?
Not to get off topic but are you going to mazda extreme street at lime rock. i want to check this out. Sounds like a decent car show and some racing....plus its a great cruise up there...Rte. 8 baby!
Last edited by matty; 04-27-04 at 07:41 AM.
04-27-04, 09:14 AM
#30
Rotary Freak
Join Date: May 2002
Location: Houston
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Hmm. I am going to need AWS plates soon.
Anyways, why are their two plates mentioned? AWS pipe and AWS solenoid?
It sounds like the AWS pipe is the one people want, after they remove the hose. What is the solenoid one for???
Anyways, why are their two plates mentioned? AWS pipe and AWS solenoid?
It sounds like the AWS pipe is the one people want, after they remove the hose. What is the solenoid one for???
04-27-04, 09:48 AM
#31
Yellow Dragon is no more
Solenoid connects the pipe and the UIM. The pipe plate is just extra the main one needed is the solenoid plate so you can remove that bulky solenoid from an area of the car in desperate need to simplicity.
Thread
Thread Starter
Forum
Replies
Last Post