? about turbo exhaust temps before the IC
#1
Rotary Enthusiast
Thread Starter
? about turbo exhaust temps before the IC
Does anyone know what the typical temps are coming out of the turbos but BEFORE the IC??
The reason I am wondering is that the bottom of my Greddy SMIC is exposed to the radiator "exhaust" and I was wondering if it would help heat soak if I but some thermal shielding on the bottom IC can.
Thanks for the help!
The reason I am wondering is that the bottom of my Greddy SMIC is exposed to the radiator "exhaust" and I was wondering if it would help heat soak if I but some thermal shielding on the bottom IC can.
Thanks for the help!
#5
No Cup Holder Racing
Join Date: Apr 2002
Location: Bay Area
Posts: 1,446
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Marshall
Stock twins???
If so, 200-250 F at around 12 psi depending on inlet temp. 15 psi on a hot day and you're heading for 300!
Stock twins???
If so, 200-250 F at around 12 psi depending on inlet temp. 15 psi on a hot day and you're heading for 300!
#7
Rotary Enthusiast
Thread Starter
so my question is -- if the turbo air is hotter than the radiator air should one be concerned about the impact of the radiator on the lower part of the IC? Not talking about the fins, but the bottom/area exposed to rad.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM