99 spec taillight conversion
#77
Rotary Freak
Thread Starter
Join Date: Mar 2003
Location: GLENDALE, CA
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
i can do that too but the cost would be much more. to ballpark it, about $150. also, the first one might take a week to learn how to make the process quicker. if there are any interest's, let me know but thats not a exact amount and it depends on the availibility of the material and time involved. i have seen those and they look good but for some reason, they only look good on a dark color car.
#78
Woohoo! I think I see mine!
I can't wait, but the car downtime is giving me an excuse to put in a 12" sub and 700Watt amp today (instead of driving on a pretty day like today)
Let me know if you are still working on mine. If so, go ahead and add the sealant "upgrade" to the service list (if you have it readily available...if not screw it [time to drive again...the Tacoma just isn't the same, and it seems like most have been successful with the existing sealant]).
Thanx!
I can't wait, but the car downtime is giving me an excuse to put in a 12" sub and 700Watt amp today (instead of driving on a pretty day like today)
Let me know if you are still working on mine. If so, go ahead and add the sealant "upgrade" to the service list (if you have it readily available...if not screw it [time to drive again...the Tacoma just isn't the same, and it seems like most have been successful with the existing sealant]).
Thanx!
#82
Rotary Freak
Thread Starter
Join Date: Mar 2003
Location: GLENDALE, CA
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
i dont do these anymore..... i did them to fix my blown motor and now i have but have gotten into an accident so i have lost all intest in them!
sorry but if i can fix the car, i might do them again!
sorry but if i can fix the car, i might do them again!
#83
Full Member
Join Date: Oct 2003
Location: augusta,ga
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
number
can you post a contact number and address..I will be in San Diego on the 30th of Mar or the 3rd of Apr. I would like to get me lights to you during that time..
#84
Rotary Freak
Thread Starter
Join Date: Mar 2003
Location: GLENDALE, CA
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
hey everyone......... i am doing these lights again!
i have been asked so many times that i went out and bought a 25 foot roll of paper that should be enough to do about 40 more pairs of lights.... when that finished, thats it.
some bad news: the 99 spec light conversions now cost $80 because i cannot get the parts for the price i use to and i cannot buy in bulk anymore.... i will be doing these for about a month or so more and then thats it. i have done a lot of them and this is the last batch...... $80 is a good deal considering the new ones cost $450-500 if you can find them!
turnaround time is 3-4 day's
pm me if anyone is intrested!
thanks
i have been asked so many times that i went out and bought a 25 foot roll of paper that should be enough to do about 40 more pairs of lights.... when that finished, thats it.
some bad news: the 99 spec light conversions now cost $80 because i cannot get the parts for the price i use to and i cannot buy in bulk anymore.... i will be doing these for about a month or so more and then thats it. i have done a lot of them and this is the last batch...... $80 is a good deal considering the new ones cost $450-500 if you can find them!
turnaround time is 3-4 day's
pm me if anyone is intrested!
thanks
#93
#71
iTrader: (1)
Join Date: Apr 2004
Location: Hayama, Japan
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
R33 doesn't meen GT-R. R-33 is just the model like FD. The silver R33 in the picture is not a GT-R. The rear fenders are not wide enough and niether are the tires. Trust me, I'm in Japan and have seen way too many.
#96
Unconfirmed
Join Date: Nov 2001
Location: Arbor Zena
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
What's up with the outside amber section of FD tails?
Would it be possible somehow to change the outside amber section to Red? ...would want to light that section with the other tails...
IMO, the lights would look much better as three red circles over the two inboard of the corners.
just a thought...
Would it be possible somehow to change the outside amber section to Red? ...would want to light that section with the other tails...
IMO, the lights would look much better as three red circles over the two inboard of the corners.
just a thought...
Last edited by Montblu; 04-10-04 at 02:40 PM.
#97
live fast. die fun.
Join Date: Aug 2002
Location: USA
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rzograbian
ok, what exactly is a GT-R then. his is 2.6, twin turbo AWD.......... is that a GT-R??
ok, what exactly is a GT-R then. his is 2.6, twin turbo AWD.......... is that a GT-R??
GTS - 2.0L or 2.5L N/A ~ 90-100kw at the wheels. Rear Wheel Drive.
GTSt - 2.0L or 2.5L Single Turbo ~ 140-150kw at the wheels. Rear Wheel Drive.
GTS4 - 2.0L or 2.5L Single Turbo ~ 140-150kw at the wheels. All Wheel Drive.
GT-R - 2.6L Twin Turbo ~ 140-150kw at the wheels. Rear Wheel Drive.
#99
Rotary Freak
Thread Starter
Join Date: Mar 2003
Location: GLENDALE, CA
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
ok, i have sent out all the lights that i have received and have no more to do at this point. i finished 11 pairs and if some of you were waiting for the line to go down, i have none now so pm me if you want to send your's....
thanks
thanks