99 Spec Front.. Finally.
#1
sold--no longer in debt
Thread Starter
99 Spec Front.. Finally.
Finally got the turn signals in today, so it's basically done. I just have to mount them and wire them.. and then put a few more bolts here and there into the front bumper.
Had a friend buff the car out yesterday and clean it up for me.. took some pictures today when the turn signals showed up.
Total cost was around $1500.. all Mazda parts, besides the turn signals.
Had a friend buff the car out yesterday and clean it up for me.. took some pictures today when the turn signals showed up.
Total cost was around $1500.. all Mazda parts, besides the turn signals.
#4
Rotary Enthusiast
Join Date: Aug 2002
Location: New York
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
I thought it was near $3k for the bumper, parts, lip, turn signals, adapter, etc. (Maybe the fog lights too...)
Was it $1500 for the front bumper, lip, turn signals, and all parts needed to be put on...before paint?
Nonetheless, beautiful car. The front lisence plate holder keeps the car legal (at least here in NY) and disrupts the front from being so "Happy" looking so I'm down for that.
Is your car lowered (yet)? It looks like my FD, pretty low in the front but the rear has quite some more gap....
Was it $1500 for the front bumper, lip, turn signals, and all parts needed to be put on...before paint?
Nonetheless, beautiful car. The front lisence plate holder keeps the car legal (at least here in NY) and disrupts the front from being so "Happy" looking so I'm down for that.
Is your car lowered (yet)? It looks like my FD, pretty low in the front but the rear has quite some more gap....
#5
sold--no longer in debt
Thread Starter
Originally Posted by quicksilver_rx7
Car looks good. I think your shock are worn. The front looks really low
That Tempo is hot
That Tempo is hot
And I drive that tempo more than i drive the 7.. 186k miles and still ticking.. and the a/c works!! RX7 = no a/c = i don't drive it during the day much .
Originally Posted by neoekai
very very nice
Originally Posted by PhoenixDownVII
I thought it was near $3k for the bumper, parts, lip, turn signals, adapter, etc. (Maybe the fog lights too...)
Was it $1500 for the front bumper, lip, turn signals, and all parts needed to be put on...before paint?
Nonetheless, beautiful car. The front lisence plate holder keeps the car legal (at least here in NY) and disrupts the front from being so "Happy" looking so I'm down for that.
Is your car lowered (yet)? It looks like my FD, pretty low in the front but the rear has quite some more gap....
Was it $1500 for the front bumper, lip, turn signals, and all parts needed to be put on...before paint?
Nonetheless, beautiful car. The front lisence plate holder keeps the car legal (at least here in NY) and disrupts the front from being so "Happy" looking so I'm down for that.
Is your car lowered (yet)? It looks like my FD, pretty low in the front but the rear has quite some more gap....
Thanks, and yeah the main reason I went with the plate holder is.. #1.. we have front plate laws in ohio. My vanity plate is coming soon (1 SLOW 7) And without it I think it just looks goofy.. way to happy--almost rx8 like. I used to hate the plate holder but the more and more I looked at it the more I loved it and couldn't live without it.
And about the suspension.. I'm running stock struts (rears are blown) with Tein S-Tech springs. Ordering Tokico struts soon, I have to save though as this bumper ordeal set me back a bit.
#6
Wankel Shmankel
Join Date: Mar 2005
Location: Oahu (Hawaii)
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
His car has to be lowered. Look at how low his sides are. He's not running sideskirts either. IMO it would be nicer to remove the lip off the 99 spec or raise the height of the car and run sideskirts (to match the height of the 99 spec)
I also like the liscence plate holder (keeps the car legal in hawaii), decreases the chance of being pulled over. Also maintains the "stock look".
Looks great though
I also like the liscence plate holder (keeps the car legal in hawaii), decreases the chance of being pulled over. Also maintains the "stock look".
Looks great though
Last edited by POS7; 08-03-05 at 05:30 PM.
#7
sold--no longer in debt
Thread Starter
Originally Posted by POS7
His car has to be lowered. Look at how low his sides are. He's not running sideskirts either. IMO it would be nicer to remove the lip off the 99 spec or raise the height of the car and run sideskirts (to match the height of the 99 spec)
Looks great though
Looks great though
Trending Topics
#8
Rotary Enthusiast
Join Date: Aug 2002
Location: New York
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by POS7
His car has to be lowered. Look at how low his sides are. He's not running sideskirts either. IMO it would be nicer to remove the lip off the 99 spec or raise the height of the car and run sideskirts (to match the height of the 99 spec)
He's got suspension issues, just fix that. Any stock bodied FD with a 99' spec front end (w/ lip) will/should be fine....it came like that in Japan for pete's sake! Besides, FD's without a lip like R1 or 99 Spec look horrible!
Cloead: Could you PM where you got all of the parts? I didn't know it was that affordable, that's HALF of what I figured when I shopped for it way-back-when...!
#9
Proud member of ARSA
Join Date: Jan 2005
Location: CA
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Your car looks good Cloead. I plan on getting a 99spec front bumper as well and have been trying to decide whether to keep the R wing or get the 99spec wing. Your pics helped me out.
#11
sold--no longer in debt
Thread Starter
Originally Posted by rx7n3wb
Your car looks good Cloead. I plan on getting a 99spec front bumper as well and have been trying to decide whether to keep the R wing or get the 99spec wing. Your pics helped me out.
#12
Wankel Shmankel
Join Date: Mar 2005
Location: Oahu (Hawaii)
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PhoenixDownVII
LOL What? He doesn't need to take the front lip off, sideskirts or not. And he certainly doesn't need to raise his car any more...wth...
He's got suspension issues, just fix that. Any stock bodied FD with a 99' spec front end (w/ lip) will/should be fine....it came like that in Japan for pete's sake! Besides, FD's without a lip like R1 or 99 Spec look horrible!
Cloead: Could you PM where you got all of the parts? I didn't know it was that affordable, that's HALF of what I figured when I shopped for it way-back-when...!
He's got suspension issues, just fix that. Any stock bodied FD with a 99' spec front end (w/ lip) will/should be fine....it came like that in Japan for pete's sake! Besides, FD's without a lip like R1 or 99 Spec look horrible!
Cloead: Could you PM where you got all of the parts? I didn't know it was that affordable, that's HALF of what I figured when I shopped for it way-back-when...!
It must have really been a long time ago, because the rx7store price hasn't changed much for 2 years or so (I believe).
This is a replacement for the stock 93+ RX-7 Front Bumper. This kit includes the Front bumper,'99 Spec turn lamps, reinforcement bar and Front lip Spoiler. This is everything you need to attach the new front end to your car
$1,430.00
http://www.rx7store.net/index.asp?Pa...PROD&ProdID=42
#13
Rotary Enthusiast
Join Date: Aug 2002
Location: New York
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by POS7
Without sideskirts, the front bumper is lower than the sides because of the lip. IMO it looks somewhat strange. The feed style sides looks great and evens it out. Suspension issues? his car looks dropped to me. Maybe its just because its on the grass, but there's no way it would sit that low unless he has it lowered for pete's sake! I guess it's just my opinion that its too low (Its probably just sunk into the grass
I'm just saying, there's no reason to take off the front lip, or lift the car. His car looks dropped? Sure, in the front,...given the lack of space in the wheel well and the grass, but have you yet to look at the rear tire and the gap around it compared to the front?
#17
sold--no longer in debt
Thread Starter
Originally Posted by Spirit_Rotary_7
Car looks great! 99 spec is always hot. Wheels and side skirts will finish her up nicely
#18
sold--no longer in debt
Thread Starter
Originally Posted by MrJohnTan
Car looks awesome....
VTEC tempo???
VTEC tempo???
#20
sold--no longer in debt
Thread Starter
Oh.. and the front end is higher now. If you look close in the pictures the lip doesnt meet perfectly with the bumper in the center. I guess the people at the bodyshop curbed it or something. I re-attached it, with bolts (!!) now. It's a little higher. Wired up the turn signals and got them screwed in. What a pain in the ***, the bolts are impossible to get to on those lamps. I'll take another picture tomarrow with the lamps on.
#22
sold--no longer in debt
Thread Starter
Good! Post pics when it's done. I just found out the front bumper is a different color than the rest of the car.. when the light hits it just right you can tell. Ugh =/. Oh well.