3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

5th gear syncro

Old May 2, 2007 | 07:55 PM
  #1  
badddrx7's Avatar
Thread Starter
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
5th gear syncro

Is there a way to tell if the 5th gear syncro is cracked, with the transmission out of the car ? Without removing the rear tail piece ?

I removed the pan off the btm and there is NO pieces of it there, looks clean. I want to make sure and MIGHT pull the tail piece off if I cannot find a better way

thanks
Reply
Old May 2, 2007 | 07:58 PM
  #2  
theorie's Avatar
AponOUT!?
Tenured Member 15 Years
iTrader: (31)
 
Joined: Nov 2002
Posts: 3,521
Likes: 13
From: Sarasota, FL
if it's cracked, you'll know it's cracked.

when mine was going i could already feel a little grinding when putting it in gear. when it was totally killed i couldn't even get into gear...
Reply
Old May 2, 2007 | 08:07 PM
  #3  
badddrx7's Avatar
Thread Starter
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
.....Without putting it in the car and trying it . I bought a used transmission and want to make sure the syncro is ok

tom
Reply
Old May 2, 2007 | 08:17 PM
  #4  
theorie's Avatar
AponOUT!?
Tenured Member 15 Years
iTrader: (31)
 
Joined: Nov 2002
Posts: 3,521
Likes: 13
From: Sarasota, FL
rephrase that: take the tranny apart and inspect the gear, or if you bolt it up and try it out LOL

the first one is probably your best bet... since the 2nd option will mean you have to do option 1 if it is in fact broken

i saw a how to guide, with pictures...somewhere around here...

---edit---

here's the guide:

http://mahjik.homestead.com/files/ho...o/synchro.html

Last edited by theorie; May 2, 2007 at 08:23 PM.
Reply
Old May 2, 2007 | 08:50 PM
  #5  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
I've taken apart a couple that didn't have a 'bad' 5th and found a cracked 5th synchro. These are the kind where it would only be a hard shift if you hurried it.

Dave
Reply
Old May 2, 2007 | 09:20 PM
  #6  
badddrx7's Avatar
Thread Starter
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
I am taking it apart - thanks for the reponses. The answer to my quesion is - No, you have to take it apart or take a chance. Better to crack it open and see.

later
Reply
Old May 2, 2007 | 10:35 PM
  #7  
Silverstone's Avatar
Look Ma! No Pistons.
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 256
Likes: 0
From: Cali
Yeah, mine was completely severed thru in one spot but you couldn't by looking at it. You had to physically pull on it and see that it would separate. Of course I knew it was bad because it wouldn't shift into 5th.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
2
Oct 9, 2015 02:19 AM
Vartok
2nd Generation Specific (1986-1992)
16
Oct 8, 2015 04:49 PM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:31 AM.