2 unkown cables
10-11-08, 01:34 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
2 unkown cables
I have a question. the garage stripped my rx-7 because of a excident.
but now i have to put the car back together my self.
i'm pretty much done but i have 2 cables left..
can you guys tell me what it is?
i searched the forum but without succes!
thnx in advance!
cable on the frontbumper, it's not the cable of the claxon!
and what is this cable?
but now i have to put the car back together my self.
i'm pretty much done but i have 2 cables left..
can you guys tell me what it is?
i searched the forum but without succes!
thnx in advance!
cable on the frontbumper, it's not the cable of the claxon!
and what is this cable?
10-13-08, 01:40 PM
#3
94 Single Turbo FD
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
the black one looks like it could be for the horn or maybe the marker lights,test some stuff and see what is not working. not sure about the white one though
i got the front end of my car all apart right now i will go see if i can find that white plug. where does it lead from?
i got the front end of my car all apart right now i will go see if i can find that white plug. where does it lead from?
Last edited by Smitter; 10-13-08 at 01:48 PM.
10-13-08, 03:02 PM
#4
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
the black one looks like it could be for the horn or maybe the marker lights,test some stuff and see what is not working. not sure about the white one though
i got the front end of my car all apart right now i will go see if i can find that white plug. where does it lead from?
i got the front end of my car all apart right now i will go see if i can find that white plug. where does it lead from?
the white one.. check te picture:
the red line made with paint show the start of the cable.
thnx for checking!
Trending Topics
10-14-08, 07:32 AM
#9
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
10-14-08, 03:18 PM
#10
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
2 unknown cables AND weird 1000 rpm idle (last post)
back with pics and another problem 
first, the white cable connector:
the cable has 2 wires, the colours are:
1. black/white
2. red/blue
and here's another picture from where it leads: (sorry for the bad quality)
and my next problem.
i started the car with no problem as usual and drove it to the garage (max 50 meter/160 feet).
i fitted the frontbumper+ headlightcovers and i started it again to call it a day.
but when i start the car it runs max 1000 rpm idle. there is continuous flowing air out of the BOV and the airfilters are sucking in air like a madman.
KLIK i have made a video to be more clear about this problem. the gauge you see in the video is the boost gauge. KLIK
thnx again!
first, the white cable connector:
the cable has 2 wires, the colours are:
1. black/white
2. red/blue
and here's another picture from where it leads: (sorry for the bad quality)
and my next problem.
i started the car with no problem as usual and drove it to the garage (max 50 meter/160 feet).
i fitted the frontbumper+ headlightcovers and i started it again to call it a day.
but when i start the car it runs max 1000 rpm idle. there is continuous flowing air out of the BOV and the airfilters are sucking in air like a madman.
KLIK i have made a video to be more clear about this problem. the gauge you see in the video is the boost gauge. KLIK
thnx again!
10-14-08, 10:06 PM
#11
The first one has to be either the marker light OR parking light in the turn signal.
The white connector is not showing up anywhere. YOU need to do some better research on where it goes and some better camera work if you are really into this and want to solve it.
Later
The white connector is not showing up anywhere. YOU need to do some better research on where it goes and some better camera work if you are really into this and want to solve it.
Later
10-15-08, 08:24 AM
#12
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Ok thanks.. i will look if i can find out where it leads to.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM