1993 Front Harness Annotated Connector Pictures
#32
Full Member
Join Date: Jul 2010
Location: sanger, california
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
ok so i looked at a lot of threads here and i have not really got a solid answer on how to connect the X-05 connector fom a JDM harness to a US harness. please help
thanks
thanks
#36
Senior Member
iTrader: (7)
Join Date: Aug 2009
Location: Bakersfield,Ca
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Awesome this will help out. I just started my front body harness simplification. Im also wanting to put my relays and fuses in the rear bins. I only want my lights and necessary plugs to go forward.
#37
Thanks again guys
Lane
#38
Rotary Freak
iTrader: (24)
I am not sure if anyone noticed, but the picture showing all 4 section of the harness is missing one more connector. It is within section 4 circled in red. Does anyone know where this connector connects to?
here's a picture of only section 4, but missing that blue connector.
-AzEKnightz
here's a picture of only section 4, but missing that blue connector.
-AzEKnightz
#42
I am not sure if anyone noticed, but the picture showing all 4 section of the harness is missing one more connector. It is within section 4 circled in red. Does anyone know where this connector connects to?
here's a picture of only section 4, but missing that blue connector.
-AzEKnightz
here's a picture of only section 4, but missing that blue connector.
-AzEKnightz
Good catch. I had to go and rummage through my discarded wiring box to see what that connector was. It's actually a mini harness that connects X-05 from the Front harness to the Emission harness. It's not in the picture but it is a two short straight shot harness with two blue ends. One male and one female. I think the male end plugs into the blue X-05 end in the picture and the female end plugs into the male blue X-05 on the emission harness.
Hope that helps.
BTW - This thread is now outdated. The more complete version is here:
https://www.rx7club.com/3rd-generati...index*-971065/
I posted something nice in post #24 too
Lane
#44
Is the battery harness decently right? The ring terminal next to the double starter one, you have it down as a ground below fuse box but sure that the positive feed from the alternator?
#46
Rotorhead for life
iTrader: (4)
Given where it is in the picture and the orientation of the lug, I'm pretty sure that wire bolts up to the output side of the 120A main fuse in the fuse box (the one with the positive battery terminal attached). If I'm correct, if you follow that wire to its other end, it will terminate in that other fuse/relay box in the picture that has the EGI Relay. When you remove the plastic cover of the fuse box, on the side opposite the battery terminal where the 120A fuse lies, you should see a threaded M6x1.0 hole for you to bolt that lug into. If you're lucky, the M6 bolt will still be there, otherwise you should be able to get one at a local hardware store.
Please confirm all of the above by consulting the FSM wiring diagram first before messing with it - I'm not liable if you inadvertently turn your FD into a car-b-q. There are links to download the FSM wiring diagrams posted on this site.
Please confirm all of the above by consulting the FSM wiring diagram first before messing with it - I'm not liable if you inadvertently turn your FD into a car-b-q. There are links to download the FSM wiring diagrams posted on this site.
#47
Full Member
Given where it is in the picture and the orientation of the lug, I'm pretty sure that wire bolts up to the output side of the 120A main fuse in the fuse box (the one with the positive battery terminal attached). If I'm correct, if you follow that wire to its other end, it will terminate in that other fuse/relay box in the picture that has the EGI Relay. When you remove the plastic cover of the fuse box, on the side opposite the battery terminal where the 120A fuse lies, you should see a threaded M6x1.0 hole for you to bolt that lug into. If you're lucky, the M6 bolt will still be there, otherwise you should be able to get one at a local hardware store.
Please confirm all of the above by consulting the FSM wiring diagram first before messing with it - I'm not liable if you inadvertently turn your FD into a car-b-q. There are links to download the FSM wiring diagrams posted on this site.
Please confirm all of the above by consulting the FSM wiring diagram first before messing with it - I'm not liable if you inadvertently turn your FD into a car-b-q. There are links to download the FSM wiring diagrams posted on this site.
i had a friend send me a pic of where the wire attaches to
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM