198hp?!? Missing 57hp!!!
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: Upper Marlboro, MD
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
198hp?!? Missing 57hp!!!
Ok I put my FD on a dyno this weekend only to find out that she was only kicking 198hp. I've decided that she needs a tune-up and new vac lines but what else? I want her as close to 255hp as possible without performance parts.
#3
For Sale
iTrader: (6)
Join Date: Jul 2001
Location: Irvine
Posts: 2,133
Likes: 0
Received 0 Likes
on
0 Posts
well the 255hp your taking about is measured at the flywheel. u might be looking at 195 RWHP on your dyno sheet. might wanna double check that. but i believe stock 7 put out around 215-225 at the wheels stock.
#5
Mr. Links
iTrader: (1)
Re: 198hp?!? Missing 57hp!!!
Originally posted by Asphyxia02
Ok I put my FD on a dyno this weekend only to find out that she was only kicking 198hp. I've decided that she needs a tune-up and new vac lines but what else? I want her as close to 255hp as possible without performance parts.
Ok I put my FD on a dyno this weekend only to find out that she was only kicking 198hp. I've decided that she needs a tune-up and new vac lines but what else? I want her as close to 255hp as possible without performance parts.
Most stock FD's are around 210-220 rwhp, so you aren't that far off...
Just start off with the normal maintenance things:
1. Check your boost pattern. Make sure you are getting the proper 10-8-10:
http://www.scuderiaciriani.com/rx7/boost_test.html
2. Change the spark plugs, fuel filter, air filters, tranny oil, etc...
#6
Rotary Freak
Join Date: Dec 2001
Location: Hattiesburg, MS
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
The 255 hp is at the crank, and you measured 198 at the rear wheels. Your probably missing more like 15 or 20 hp, not 57. Start with new plugs, wires, air filter, oil, vac lines, usual tune up stuff.
Trending Topics
#8
Rotary Enthusiast
Join Date: Mar 2001
Location: Mechanicsburg, PA USA
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
actually your FD is only missing about 12-22 hp - dyno numbers are calculated in rear-wheel horsepower and most stock FDs pull down between 210 and 220 rwhp. 198 rwhp is still weak - but not awful - change your plugs and wires, do the vacuum lines - and maybe you can pull some better numbers
#17
Senior Member
Join Date: May 2002
Location: Washington
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
If you have a boost guage check to see if your running the 10-8-10 boost pattern, that is if your running sequential. If your having problems with boost then go Non sequential!!
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM