Who can help me ?
Where can i found new 1600 cc injectors side feed without modifications for the stock fuel rail ?

 

You can't -- no one makes side feed 1600s.

You can get 1300 cc/min injectors for the stock rail, though. They are just 850s that have been enlarged. You can buy them on a new or exchange basis, or you can send yours to rceng.com for enlargement.

-Max

 

Thanks,Max

 

havent the 1300's had problems?

 

What kind of problems ?

 

I have heard of perhaps one person that had trouble with them. Most of the FUD surrounding them seems to be rumor and hearsay, though. Lots of people have been using them for a long time without problems.

-Max

 

http://www.3rdgenrx7.com/keithsrails.htm

 

I have one of the Keiths Rails kits, just waiting for the injector clips then it will be fitted.

Quality is high, although it looks like the injector holes are a little too close to the feed joins.

Dan

 

dan... i am assuming you are refering to the secondary rails?
try putting a fitting on it. there is NO WAY you are going to cover up the hole. if you do, i will mail you a prize! (they are PIPE THREAD) you are only going to get a few turns, maybe 5 threads in before it wont go any further.... no problems with the placement.