fritts

iTrader: (5)

I have some 1300's that have sat for a while. I want to make sure they don't stick when I put them in. I had thought I heard that RC suggested doing something to bored out injectors that have sat for a period of time. Could someone let me know what that is? Have searched to no solution.

Thanks

Rocking Rotary

iTrader: (14)

Your injectors are already bored if they are 1300cc's. The bore makes the injector larger. RC instructed me that after cleaning they need to be installed asap. So if you want piece of mind send them for cleaning again, or just take a chance and install them.

maxcooper

If an injector is stuck, it won't click when you apply 12v to the contacts. Just test them before installation.

-Max

dgeesaman

iTrader: (7)

Or if you don't have a low-amp 12v source handy, use a 9v battery.