*pics* shipped my car off, goodbye rx7club!
#1
formerly 93BlackFD
Thread Starter
Join Date: Feb 2005
Location: Marietta, GA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
*pics* shipped my car off, goodbye rx7club!
thanks for all the help and support over the past few years, here's some final pics (bought stock two years ago)
link to details on car here: https://www.rx7club.com/forum/showth...7&page=1&pp=15
link to details on car here: https://www.rx7club.com/forum/showth...7&page=1&pp=15
#5
Rotary Enthusiast
Join Date: Aug 2002
Location: New York
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Wow, the FD's Driver's side tires are halfway off the ramp in the last photo, and the car is nearly falling off in the photo before that...
Someone needs to direct the driver better! There's so much room to work with too!
I've done some scarey ramp/tow work with previous cars of mine and I'm glad I had a better spotter than you did! :P
Someone needs to direct the driver better! There's so much room to work with too!
I've done some scarey ramp/tow work with previous cars of mine and I'm glad I had a better spotter than you did! :P
Trending Topics
#8
formerly 93BlackFD
Thread Starter
Join Date: Feb 2005
Location: Marietta, GA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by turbojeff
Interesting mods, a few questions.
Stock rad
Single turbo
FMIC
Must equal overheating?
Tight elbow on compressor outlet seems like it would restrict flow quite a bit?
Why the relocated oil filter?
Stock rad
Single turbo
FMIC
Must equal overheating?
Tight elbow on compressor outlet seems like it would restrict flow quite a bit?
Why the relocated oil filter?
it's a much larger filter unit than the stock one, as you can see....and I did it because i like clean oil, good for the engine The effect of the piping is unknown, I was perfectly happy with spool and hadn't investigated redoing the IC piping, I never had overheating issues, but I did have a modified (tightly clearanced) water pump setup and a 34row oil cooler
#9
Senior Member
iTrader: (1)
Originally Posted by PhoenixDownVII
Wow, the FD's Driver's side tires are halfway off the ramp in the last photo, and the car is nearly falling off in the photo before that...
Someone needs to direct the driver better! There's so much room to work with too!
I've done some scarey ramp/tow work with previous cars of mine and I'm glad I had a better spotter than you did! :P
Someone needs to direct the driver better! There's so much room to work with too!
I've done some scarey ramp/tow work with previous cars of mine and I'm glad I had a better spotter than you did! :P
#11
Rotary Freak
Originally Posted by littlemilla3
Look at the name of the towing company. There is some kind of curse between that name and rx-7's
#14
Eats, Sleeps, Dreams Rotary
Originally Posted by FD3RotorTurbo
how did you do that? i have been trying to find a write up or anthing for that matter about it
go here...
3rd gen->things to read->interior mods->ac control relocation
*hmm I think the efini.net link is down...I know there was a write-up on the forum (you might want to do another search)
#15
Call me gramps!
Originally Posted by 7racer
go here...
3rd gen->things to read->interior mods->ac control relocation
*hmm I think the efini.net link is down...I know there was a write-up on the forum (you might want to do another search)
3rd gen->things to read->interior mods->ac control relocation
*hmm I think the efini.net link is down...I know there was a write-up on the forum (you might want to do another search)
#20
Rotors keep you going
Join Date: May 2004
Location: Boston, Massachusetts
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
I was just wondering about the center console and how you got that finish look on it. Not the relocation of the buttons but the console's color.