Rear suspension cams
#1
Rear suspension cams
So after doing a rear suspension rebuild (new pillowballs, bushings and wheel bearings) I had a shop do an alignment. The rear cams were upside down. They told me that is not unusual when doing an adjustment. I suspect they were just lazy. What do you guys think? I forgot to mention, I am running Eibach springs that are about 1 inch lower. Otherwise everything is stock.
Last edited by mecman; 07-05-19 at 10:12 AM.
#2
Rotary Freak
Be about 5 secs work to install that first cam so that it didn't risk slipping if they did it correctly. You've had monkeys masquerading as humans work on the car sorry to say, more than likely the alignment will be ***** with that quality of work too.
Thread
Thread Starter
Forum
Replies
Last Post
uRizen
2nd Generation Specific (1986-1992)
23
12-22-04 09:48 AM
Rpeck
2nd Generation Specific (1986-1992)
31
02-18-03 01:23 AM