Rear Bumper fascia name badges
#1
Junior Member
Thread Starter
Rear Bumper fascia name badges
I am having my rear bumper fascia repainted, and will need the "RX-7" and "MAZDA" name badges. I have found them at Mazda parts sellers by they want $75 for the pair. Does anyone know of a source that is less expensive?
Thanks much,
John H.
Thanks much,
John H.
#2
Always Bad Advice
I don't know of another source you might try giving Ray a call. Just a heads up the rear Mazda emblem on our cars is a unique (to our cars) size and is no longer available. Sometimes a shop will just snap it off thinking that they can always replace it... which they can't.
#4
Frequent Tool Misplacer
iTrader: (1)
I'm a little late on this, but if you're still looking I did find this:
https://www.shapeways.com/product/7V...li=marketplace
A 3D printed version of the "RX-7" lettering. I doubt there's any way it's as good as the OE lettering but hey, it's an option. For 25 bucks I figured I'd take the plunge and see how they are. I can report back with pics when they're delivered. You can get it in various colors too if that's your thing (I chose red 'cause why not).
https://www.shapeways.com/product/7V...li=marketplace
A 3D printed version of the "RX-7" lettering. I doubt there's any way it's as good as the OE lettering but hey, it's an option. For 25 bucks I figured I'd take the plunge and see how they are. I can report back with pics when they're delivered. You can get it in various colors too if that's your thing (I chose red 'cause why not).
#7
Frequent Tool Misplacer
iTrader: (1)
Following up, got the letters today.
Print quality is good, no real complaints there.
They are bigger than the original lettering, which I wasn't expecting. Maybe 1.5 ~ 1.7x the size of the originals.
That leaves it looking just a little too big for my tastes.
So there ya go! I may spraypaint them to a darker shade of red and see how they look then, or maybe see how they look on the passenger side dash or something like that. But, tastes differ and if this looks like your thing, by all means go for it!
Print quality is good, no real complaints there.
They are bigger than the original lettering, which I wasn't expecting. Maybe 1.5 ~ 1.7x the size of the originals.
That leaves it looking just a little too big for my tastes.
So there ya go! I may spraypaint them to a darker shade of red and see how they look then, or maybe see how they look on the passenger side dash or something like that. But, tastes differ and if this looks like your thing, by all means go for it!
Thread
Thread Starter
Forum
Replies
Last Post
Recipe7
3rd Generation Specific (1993-2002)
6
11-07-03 01:22 AM
capt. bill1
3rd Generation Specific (1993-2002)
2
09-24-01 04:09 PM