Post pics of your exhaust system..... (buyers guide)
12-01-09, 05:25 PM
#452
deal with it
iTrader: (10)
Join Date: Jun 2008
Location: California
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
I wanted the Buddy Club but couldn't find one, so I made one similar with a magnaflow tip
This is what the car sounds like... no resonators or cat or mufflers:
http://www.youtube.com/watch?v=KQen3GEKaUU
sorry I didn't get on it... I have a restrictor plate in there but still worried about boost creep. That and I sprung a radiator leak
This is what the car sounds like... no resonators or cat or mufflers:
http://www.youtube.com/watch?v=KQen3GEKaUU
sorry I didn't get on it... I have a restrictor plate in there but still worried about boost creep. That and I sprung a radiator leak
12-03-09, 12:16 PM
#454
Newb Photog
Join Date: Jul 2001
Location: new jersey
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
This is what the car sounds like... no resonators or cat or mufflers:
http://www.youtube.com/watch?v=KQen3GEKaUU
sorry I didn't get on it... I have a restrictor plate in there but still worried about boost creep. That and I sprung a radiator leak
http://www.youtube.com/watch?v=KQen3GEKaUU
sorry I didn't get on it... I have a restrictor plate in there but still worried about boost creep. That and I sprung a radiator leak
12-03-09, 12:48 PM
#455
Junior Member
Join Date: Oct 2008
Location: Sweden
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Farkel: I have straight pipes to, and wot sounds insane, but good.
I made a custom catback out of a old blitz one.
Insted of the muffler its a Y-pipe and two 3" pipes.
I made a custom catback out of a old blitz one.
Insted of the muffler its a Y-pipe and two 3" pipes.
12-14-09, 06:44 PM
#456
Full Member
Join Date: Jul 2009
Location: Markham, ON, Canada
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
yeah, I know, I'm bumping this back up again...only because I am very curious, and interested in knowing what other exhaust systems do you guys have; what kind of numbers are you guys getting, and change in performance (positive, and negative), etc etc.
02-22-10, 11:53 PM
#460
Doritos on a toothpick
...got my hands on a Greddy TR Power Evolution....BIG piping...BIG sound...even had to dial down my boost controller a bit from the extra flow... 
02-23-10, 07:34 PM
#461
Senior Member
iTrader: (7)
Join Date: Aug 2007
Location: winnipeg
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Not to sure if I posted my exhaust yet. On the previous page I was asking about the racing beat dual tip, because I wasnt quite sold on it.
Well I decided to pick one up last summer. Heres a vid of my car on the dyno. My exhaust is 3 inch downpipe, to resonated mid pipe, to the rb dual. Auto trans.
Just after I let off the gas my blow off valve decided to blow completely off, only at 10 psi! It was a greddy unit stock mounted with a hose to the blow off valve, and the hose came right off the y pipe. In the second dyno pull video the exhaust sounds much different because I didnt notice the massive boost leak, yet I still made 246whp.
Anyways on to the vid:
http://www.youtube.com/watch?v=lIWRwN9MS1Q
Well I decided to pick one up last summer. Heres a vid of my car on the dyno. My exhaust is 3 inch downpipe, to resonated mid pipe, to the rb dual. Auto trans.
Just after I let off the gas my blow off valve decided to blow completely off, only at 10 psi! It was a greddy unit stock mounted with a hose to the blow off valve, and the hose came right off the y pipe. In the second dyno pull video the exhaust sounds much different because I didnt notice the massive boost leak, yet I still made 246whp.
Anyways on to the vid:
http://www.youtube.com/watch?v=lIWRwN9MS1Q
03-03-10, 08:05 AM
#462
Fabled Creature
Join Date: Mar 2001
Location: Fairfax, VA U.S.A.
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Can't really see it but its a Piper Motorsport custom dp, Racing Beat resonated mp, & GReddy Power Extreme cat-back.
http://www.youtube.com/watch?v=ukVi_gERGUg
http://www.youtube.com/watch?v=ukVi_gERGUg
03-03-10, 06:32 PM
#465
Where has my $ gone?
iTrader: (12)
Join Date: Feb 2004
Location: Bay Area, Cal/Phoenix, AZ
Posts: 1,654
Likes: 0
Received 7 Likes
on
2 Posts
Olddd crappy video....but its a Greddy Ti, MP(no resonator), it doesn't give it justice to how extremely loud it is. lol
http://www.youtube.com/watch?v=1B_4peNUxpE
http://www.youtube.com/watch?v=1B_4peNUxpE
03-05-10, 03:54 AM
#470
Full Member
iTrader: (10)
Join Date: May 2005
Location: Brooksville Florida
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
I have the TANABE CONCEPT G on mine & I love it. Im not crazy about the dual outlet style tips although I liked the sound of the Racing Beat, so I decided on the Tanabe just to see if it was what they claimed & it was more then I had hoped for, mellow on low RPM's but had that Racing Beat rasp @ higher RPM, its a newer one to the market for the FD from Tanabe, but I would recommeneded it to anyone looking to replace what they have or looking for something that aint as load as what they may currently have & wants a really nice tone.
My friend has the Racing Beat Dual tip & after hearing mine he is considering selling his RB to get the Tanabe !
My friend has the Racing Beat Dual tip & after hearing mine he is considering selling his RB to get the Tanabe !
05-02-10, 01:09 PM
#475
looking for 82-83 corolla
iTrader: (6)
Join Date: Aug 2005
Location: ar
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
custom built by yours truely. 3" fleabay downpipe off stockers heat wrapped and flex added to v-banded midpipe resonated with one dynomax bullet muffler to catback muffler with magnaflow muffler i had laying around.
sounds real good very deep idle wicked rotary rap getting on it and under overpasses lol. not bad right now but still abit louder than i want so ill be adding another bullet to the midpipe and wrapping it and that should be perfect i hope.
z
pics follow
sounds real good very deep idle wicked rotary rap getting on it and under overpasses lol. not bad right now but still abit louder than i want so ill be adding another bullet to the midpipe and wrapping it and that should be perfect i hope.
z
pics follow