Front strut bars weights comparing
08-31-16, 11:04 PM
#1
Front strut bars weights comparing
Hello everyone!
I decided to check different front stut bars' weights while I have them.
So you can check pics. Weight in kilos.
May be someone has some else bars to add in comparing
Stock front, stock rear, Carbing-3 point bar, Autoexe/KTS 6-point bar.
I decided to check different front stut bars' weights while I have them.
So you can check pics. Weight in kilos.
May be someone has some else bars to add in comparing
Stock front, stock rear, Carbing-3 point bar, Autoexe/KTS 6-point bar.
09-01-16, 12:53 AM
#2
Full Member
iTrader: (1)
Join Date: Jun 2011
Location: CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Very interesting. I also want to see the weight difference on other front strut bars as I once thought of buying one of those ebay aluminum strut bars to save a few pounds at the front end. I didn't do that at the end because I wasn't sure if saving a few pounds with an alumninum strut bar wound actually hurt the rigidity.
09-15-16, 06:01 AM
#3
As pictures sometimes vanish in forums, the weights are:
R1 front: 1.9 kg
Factory rear: 1.7 kg
Carbing 3-Point: 1.7 kg
KTS 6-Point: 4.7 kg
For archival purposes.
For those that don't know, the conversion is 1 kg = 2.2 lbs - hope this helps someone one day!
Nick
R1 front: 1.9 kg
Factory rear: 1.7 kg
Carbing 3-Point: 1.7 kg
KTS 6-Point: 4.7 kg
For archival purposes.
For those that don't know, the conversion is 1 kg = 2.2 lbs - hope this helps someone one day!
Nick
09-18-16, 12:50 PM
#5
This should probably have gone here ---> https://www.rx7club.com/3rd-generati...weigh-1103120/
Thread
Thread Starter
Forum
Replies
Last Post