aftermarket SMICs still being made anywhere?
Trending Topics
#14
This is the latest improved version
premium u type intercooler
2 piece carbon fibre ducting
Improvements
Cores are 85mm thickness (were 75mm)
And carbon fibre ducting enlarged by
15mm on opening for max airflow to cores.
Good for 20psi at 8500rpm holds temps stable
premium u type intercooler
2 piece carbon fibre ducting
Improvements
Cores are 85mm thickness (were 75mm)
And carbon fibre ducting enlarged by
15mm on opening for max airflow to cores.
Good for 20psi at 8500rpm holds temps stable
Last edited by THE DOCTOR; 04-07-16 at 04:54 PM.
#20
#21
Rotary Enthusiast
iTrader: (30)
boost leak tester | eBay
#22
Full Member
Originally Posted by THE DOCTOR
This is the latest improved version
premium u type intercooler
2 piece carbon fibre ducting
Improvements
Cores are 85mm thickness (were 75mm)
And carbon fibre ducting enlarged by
15mm on opening for max airflow to cores.
Good for 20psi at 8500rpm holds temps stable
premium u type intercooler
2 piece carbon fibre ducting
Improvements
Cores are 85mm thickness (were 75mm)
And carbon fibre ducting enlarged by
15mm on opening for max airflow to cores.
Good for 20psi at 8500rpm holds temps stable
#24
Rx7 Wagon
iTrader: (16)
It looks to include some bracketry, but you might have to get creative to make it work with your setup. It should be approachable to make this bracket and get some longer/shorter coolant lines, for the DIYer.
How do you buy the ARD twin-pass IC? I can't find anything searching.
I guess you have to go through THE_DOCTOR. He's not hard to find
#25
Originally Posted by Brekyrself
You could pressurize it with a tire pump and boost leak tester. This should clean it out.
boost leak tester | eBay
boost leak tester | eBay
Instead, you'd need continuous pressurized flow through the unit, such as by hooking it up and crossing your fingers for 20k mi or so.