Boost pattern 8-0-0

 
Thread Tools
 
Search this Thread
 
Old Aug 11, 2001 | 01:04 PM
  #1  
CantGoStraight's Avatar
Thread Starter
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
Boost pattern 8-0-0

I put a boost gauge on temporarily. I drove the car and was getting around 8 or 9 psi under 4400rpm. At around 4500 rpm it went to zero. At idle it was pulling around 20 in vaccuum. When in gear at idle it was at around 15 vaccuum.

So it is obvious I have a problem. Now where do I start the search? I don't have a service manual and have no experience with this type of car. So please be specific with location and what to look for. Thanks, Jerry Any ideas what and where to look would be appreciated.
Old Aug 11, 2001 | 10:25 PM
  #2  
ZoomZoom's Avatar
SEMI-PRO
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Feb 2001
Posts: 2,865
Likes: 36
From: New Jersey
We all have similar problems it seems. I wish I had a ROtary specialist in my area! HAve you tried that? Pettit? Anyways here is some info you can sort through http://www.scuderiaciriani.com/rx7/boost_problems.html
Old Aug 13, 2001 | 02:57 PM
  #3  
7-sins's Avatar
thats not paint....
Tenured Member 20 Years
 
Joined: May 2001
Posts: 2,231
Likes: 2
From: Manassas, VA
I have the exact same problem... except my curve is more like 11-0-0. When I first got the car it was less than 11psi on the Primary. I found the problem in the coupling comming from the Y-Pipe to the IC. Primary Turbo problems are rather easy to find... on the other hand Secondary Turbo problems are a lot harder. I have checked just about everything I could with my little tool array and amature know how. I finaly gave up and it's in a mechanics hands now. I *should* hear back from them tomorrow and will post what they found.

Also a few other symtoms I noticed:

0 boost if I go past 4500 in a gear then shift to the next quick.
Around 20 inHg vacuum.
Running rich.

Hope it helps,
Chris
Krush000@hotmail.com

Old Aug 13, 2001 | 08:14 PM
  #4  
Jerry Nuss's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 60
Likes: 0
That is exactly what I am experiencing. I am also limited with this car and tools available. I really want to hear what and if your mechanic gets it figured out.
Old Aug 14, 2001 | 01:16 AM
  #5  
AdamP's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 174
Likes: 0
From: Vancouver, BC, Canada
Mine boosts 14-5-5 so I don't know if it is the same proble but I am interested in your results.

Adam Perrins
Old Aug 14, 2001 | 01:39 PM
  #6  
Roadracing7's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jun 2001
Posts: 320
Likes: 0
From: Simpsonville, SC
Everyone check the E clip on your turbo actuator, they fall off too often and would cause a secondary problem. Hope this helps.

Richard
Old Aug 14, 2001 | 03:11 PM
  #7  
7-sins's Avatar
thats not paint....
Tenured Member 20 Years
 
Joined: May 2001
Posts: 2,231
Likes: 2
From: Manassas, VA
Yeah well.... bad news... The people didn't have a chance to work on my car. I am pretty dissapointed because I have been without it for a little longer than a week but hey I didn't get charged. They said that they were busy.. thats cool with me but I would just rather have my car and take it up there when they are not busy. I got to have it back so I can go to the MD BBQ this weekend. I'll try to check that E clip tonight when I get her back and see whats up.

Chris
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
alexdimen
3rd Generation Specific (1993-2002)
20
Oct 23, 2015 01:50 PM
High_Carb_Diet
Power FC Forum
1
Sep 5, 2015 09:07 AM




All times are GMT -5. The time now is 12:58 AM.