WTF! Still one confused mofo about injectors...
#1
Y00s a h000
Thread Starter
Join Date: Jul 2003
Location: Central NJ
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
WTF! Still one confused **** about injectors...
Ok, i'm looking for 720cc injectors for my car. The more I look around, the more different type I see and the more I get confused about what the hell everyone is talking about. First of all, here is what I have noticed about injectors:
- There are high impedence and low impedence injectors
- Some have an oval and some have a square type connector
Now I have an 89' TII, does it use high or low impedence injectors stock? Do the stock ones use oval or square connectors? Are 720cc injectors going to be high or low impedence?
Here is what I am looking at getting:
http://www.rx7store.net/index.asp?Pa...ROD&ProdID=646
Now after buying these, is the connector style the same as the S5 TII, and will I have to put in any resistors?
I keep hearing so many conflicting facts about injectors so I thought maybe SOMEONE could clear it all up for me.
- There are high impedence and low impedence injectors
- Some have an oval and some have a square type connector
Now I have an 89' TII, does it use high or low impedence injectors stock? Do the stock ones use oval or square connectors? Are 720cc injectors going to be high or low impedence?
Here is what I am looking at getting:
http://www.rx7store.net/index.asp?Pa...ROD&ProdID=646
Now after buying these, is the connector style the same as the S5 TII, and will I have to put in any resistors?
I keep hearing so many conflicting facts about injectors so I thought maybe SOMEONE could clear it all up for me.
#2
Nurse I need 1300cc's NOW
i could be wrong but i always thought that the t2's came with low impedence , and the s5 na s came with high . and that the injector harness fitting was square
#3
Nurse I need 1300cc's NOW
i could be wrong but i always thought that the t2's came with low impedence , and the s5 na s came with high . and that the injector harness fitting was square, correct me if im wrong
#4
your injectors are saturated drivers also called High Imp(10-16 ohm)...what you are looking at on that site is most likely a low imp injector..call them..I am sure they can tell you if it will fit
http://www.rotaryresurrection.com/ro.../injector.html
go there^^^ and see what you need
http://www.rotaryresurrection.com/ro.../injector.html
go there^^^ and see what you need
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
ALL the RX-7 injectors after mid 1987 are HIGH impedence.
I know nothing else about the rest of your post. The Greddy picture looks to have square/rectangular jacks on it though.....which makes me GUESS that they MIGHT be low impedence. Might not be low impedence though. Send them an e-mail to find out. Or search the web for GREDDY INJECTORS.
I know nothing else about the rest of your post. The Greddy picture looks to have square/rectangular jacks on it though.....which makes me GUESS that they MIGHT be low impedence. Might not be low impedence though. Send them an e-mail to find out. Or search the web for GREDDY INJECTORS.
#6
Y00s a h000
Thread Starter
Join Date: Jul 2003
Location: Central NJ
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know of a place that sells 720cc injectors that are high impedance and have the oval plugs? I dont know of a lot of places that sell injectors that list out their details.
#7
Boosting Again
the greddy 720cc injectors from rx7store are LOW impedence, i orderd them and used them on my 87t2 and worked out great, if you have a 89 you have high impedence adn will need to use a resistor pack.
Trending Topics
#9
Y00s a h000
Thread Starter
Join Date: Jul 2003
Location: Central NJ
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gergrx7
the greddy 720cc injectors from rx7store are LOW impedence, i orderd them and used them on my 87t2 and worked out great, if you have a 89 you have high impedence adn will need to use a resistor pack.
#10
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
I searched and found this thread https://www.rx7club.com/forum/showth...ght=GREDDY+720 it apes what the others said above. I did not read everything in the post. Just Ragtop.
#11
Y00s a h000
Thread Starter
Join Date: Jul 2003
Location: Central NJ
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
Can different connectors be bought to use the oval type ones on a square type injector plug? Where would I find one of those? Also, at rx7.com they have the "injector resistor" packs, but are they just standard 10ohm resistors I can buy at Radio Shack?
#12
Lives on the Forum
Zenki FC's use Bosch "rectangular" fuel injectors plugs.
Most of the big auto parts chains stores carry them - check Auto Zone, Pep Boys, Kragen / Schucks / Checkers - they are priced about $10 - $12.
You might want to also check out K-Mart, as they carry some odd stuff sometimes.
ALL Kouki FC's use high impedence, oval ND fuel injector plugs.
Yes, you can buy 10-ohm (I recommend the 20-watt) "sandblock" resistors from Radio Shack. Use one per fuel injector.
The GReddy 720's are standard ND, top-feed, low-impedence fuel injectors.
If you are going to try and use them on your 87.5+ FC, you'll need the resistor blocks.
If you're going to use them on your Kouki FC, you'll need the Bosch rectangular plugs.
-Ted
Most of the big auto parts chains stores carry them - check Auto Zone, Pep Boys, Kragen / Schucks / Checkers - they are priced about $10 - $12.
You might want to also check out K-Mart, as they carry some odd stuff sometimes.
ALL Kouki FC's use high impedence, oval ND fuel injector plugs.
Yes, you can buy 10-ohm (I recommend the 20-watt) "sandblock" resistors from Radio Shack. Use one per fuel injector.
The GReddy 720's are standard ND, top-feed, low-impedence fuel injectors.
If you are going to try and use them on your 87.5+ FC, you'll need the resistor blocks.
If you're going to use them on your Kouki FC, you'll need the Bosch rectangular plugs.
-Ted
#13
I R SAD PANDA W/O BAW
Greddy 720cc square low impedence injector from rx7store
S5 TII high impedence oval injector harness
Radioshack 10watt/10ohm resistors Part # 271-132 (package of 2 under $2)
If you go this route I recommend you buy the square connectors to replace the stock oval ones. I also soldered in my resistors at the ECU.
S5 TII high impedence oval injector harness
Radioshack 10watt/10ohm resistors Part # 271-132 (package of 2 under $2)
If you go this route I recommend you buy the square connectors to replace the stock oval ones. I also soldered in my resistors at the ECU.
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
10-04-15 06:35 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM