wtf is a solined resister?
01-12-07, 02:43 PM
#1
Full Member
Thread Starter
iTrader: (6)
Join Date: Dec 2006
Location: tucson AZ
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
wtf is a solined resister?
alright, so heres the deal, swaping in a t2 into my n/a gxl, i was reading a parts list and i have everything i need minus four parts that i have absolutly no clue what the hell they are... the first one is a solenoid resistor, the turbo intake duckt, turbo boost sensor and the knock controll box can someone help elxpain what they are and where i can get them? i know the answers probably on the forum but hell! that searching tool sucks!
-Ryan
-Ryan
01-12-07, 02:50 PM
#2
the TID is a rubber s- shaped tube that comes off the front of the turbo and connects to the AFM. the boost sensor is a small box that has a vacuum nipple attached and is located on the pass. side front strut tower. the knock control box is located to the right of the ecu and is a small gray box with one clip on it. try the classifieds section to obtain these parts
I dont have the other stuff tho, sorry.
01-12-07, 08:08 PM
#4
Alot Of Work!
iTrader: (1)
Join Date: Jul 2004
Location: Iowa
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
the selinoid resistor i belive on some earlier s4's is a part of the efi system it is located on the pass. side right behind head light assemb. rectangular silver box i have a knock control box from a 87 tII and i have a selinoid resistor but its from an 86 base if you are interested in knock box PM me
01-12-07, 09:00 PM
#6
Interruptor Illuminada
Join Date: Apr 2006
Location: MD
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
The solenoid resistor is located behind the pass side headlight, underneath the airbox, and bolted to the bottom of the strut tower. Silver in color. There is about a page dedicated to it in the Haynes manual. Look there.
Thread
Thread Starter
Forum
Replies
Last Post
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM
