would this intercooler fit a s4 TII
#1
Full Member
Thread Starter
Join Date: Apr 2001
Location: columbus,ohio,usa
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
would this intercooler fit a s4 TII
would this intercooler fit a s4 TII?
19" (top/bottom) x 9.5" high x 2.25" thick
TIG welded end tanks, CNC hose barb outlets (2.25 inlet, 2.25" outlet)
19" (top/bottom) x 9.5" high x 2.25" thick
TIG welded end tanks, CNC hose barb outlets (2.25 inlet, 2.25" outlet)
#2
Senior Member
Join Date: Mar 2001
Location: Mount Juliet, TN
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Yeah it should fit.... I think the radiator on a TII is 22 inches wide..
Any time you install an intercooler that is not specifically made for a TII you should expect to do some cutting, or fabricating.
Any time you install an intercooler that is not specifically made for a TII you should expect to do some cutting, or fabricating.
#3
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
is the 19" the core or with the endtanks? if that's total. it could be another 3-4"s longer. if that's the core, it might be a bit too long.
you'd want the pipes to be coming out the top... not out the side though....
the starion one is 2.25 x 8.5 x 21 total and it fits like this
http://www.1300cc.com/howto/how2/frontend/phase5.htm
you can't fit anything thicker, and it has a few inchs side to side, height wise it's perfect. taller would fit, just woudn't be in the air/flow
you'd want the pipes to be coming out the top... not out the side though....
the starion one is 2.25 x 8.5 x 21 total and it fits like this
http://www.1300cc.com/howto/how2/frontend/phase5.htm
you can't fit anything thicker, and it has a few inchs side to side, height wise it's perfect. taller would fit, just woudn't be in the air/flow
Last edited by Scott 89t2; 09-13-02 at 01:09 AM.
#5
Junior Member
Join Date: May 2002
Location: San Clemente, CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
That looks pretty good, although I don't know much about FMIC's. I am interested in the Starion one myself for the reasons that Scott 89T2 said about the openings.
#6
Originally posted by Scott 89t2
you'd want the pipes to be coming out the top... not out the side though....
you'd want the pipes to be coming out the top... not out the side though....
Thread
Thread Starter
Forum
Replies
Last Post
kkev.7788
2nd Generation Specific (1986-1992)
7
09-02-15 01:32 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM