2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Won't start confused!!!!!!

Thread Tools
 
Search this Thread
 
Old Jan 27, 2013 | 10:47 PM
  #1  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
Won't start confused!!!!!!

Hey guys been awhile since I have been on here just got another seven think god I'm back with the beasts lol anyway I have a 86 rx7 I just bought has 58000 original miles just had 2100 dollars worth of suspension work brand new tires and he put a brand new fuel pump and filter it cranks but acts as if its not getting fuel got spark and damn good compression so yeah needless to say I'm stuck lol sorry for the run on sentence on my phone and its a pain in the butt to put quotation in lol any help would help thanks guys
Reply
Old Jan 27, 2013 | 10:51 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
did you plug the pump/sendor connector back onto the harness after you installed the pump in the tank?..(easily overlooked).
Also,are the hoses connected to their respective places at the tank?.(Out and return)
Reply
Old Jan 27, 2013 | 10:55 PM
  #3  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
I will check in the morning cause he did all that work before I bought it but I also pulled the fuel line off and turned the car on and fuel came out of it so I think the oil and everything is fine and I just sent the injectors into get the cleaned and such they are good as well could it possibly be the arm you think
Reply
Old Jan 28, 2013 | 07:27 AM
  #4  
jackhild59's Avatar
Rotary $ > AMG $
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Apr 2005
Posts: 3,785
Likes: 30
From: And the horse he rode in on...
Originally Posted by rotaryguy481
Hey guys been awhile since I have been on here just got another seven think god I'm back with the beasts lol anyway I have a 86 rx7 I just bought has 58000 original miles just had 2100 dollars worth of suspension work brand new tires and he put a brand new fuel pump and filter it cranks but acts as if its not getting fuel got spark and damn good compression so yeah needless to say I'm stuck lol sorry for the run on sentence on my phone and its a pain in the butt to put quotation in lol any help would help thanks guys

You want everyone else to work at solving your problem while you are too self-centered to insert punctuation or type complete cogent sentences?

Log out and come back to the forum when you have grown up.
Reply
Old Jan 28, 2013 | 07:44 AM
  #5  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
Really dude I don't need smart *** comments I just need help don't help if you don't like how I write **** it's that easy thanks
Reply
Old Jan 28, 2013 | 09:07 AM
  #6  
jackhild59's Avatar
Rotary $ > AMG $
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Apr 2005
Posts: 3,785
Likes: 30
From: And the horse he rode in on...
Originally Posted by rotaryguy481
Really dude I don't need smart *** comments I just need help don't help if you don't like how I write **** it's that easy thanks
<sigh> You are too lazy to type punctuation or structure sentences. You want others to solve your problem AND decode your near senseless typing.


That's not smart-***. That's the truth. You just don't like it.
Reply
Old Jan 28, 2013 | 09:22 AM
  #7  
texFCturboII's Avatar
version 2.0
Tenured Member 15 Years
iTrader: (17)
 
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
Well, IS it getting spark?
Reply
Old Jan 28, 2013 | 09:45 AM
  #8  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
Yeah I pulled the wires and checked all of them the first one I had was due to the afm so that's kinda what I'm thinking its am exspensive fix though lol anyway to test that
Reply
Old Jan 28, 2013 | 10:00 AM
  #9  
Customisbetter's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2012
Posts: 462
Likes: 0
From: Michigan
Double check the CAS timing.
Reply
Old Jan 28, 2013 | 10:09 AM
  #10  
Chuck's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Mar 2004
Posts: 690
Likes: 0
From: Charlottesville, VA
Rotaryguy; I'm inclined to agree with jackchild here. Its really not that hard to place a period at the end of a sentence rather than LOL and begin the next one with a capital letter.

It sounds like your CAS needs restabbing. Once you've completed this task, then check your timing using a timing light.
Reply
Old Jan 28, 2013 | 10:24 AM
  #11  
texFCturboII's Avatar
version 2.0
Tenured Member 15 Years
iTrader: (17)
 
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
If it's not timing, I'd inspect the voltage to the primary injectors at the ECU. If you find you aren't getting correct voltage there, then something is most likely up with the injector clip for that injector(s). Either a pin has pushed back and is not making a good connection or a wire has broken. May as well inspect the secondaries too.
Reply
Old Jan 28, 2013 | 10:30 AM
  #12  
satch's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 16
From: tulsa,ok.
Make sure the 15 amp Engine fuse is good as it powers the fuel pump. Make sure the pump turns on w/key to on and fuel check connector jumpered.
Reply
Old Jan 28, 2013 | 10:34 AM
  #13  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
Yeah I understand that but on a phone it's a pain in the *** so I don't do it anyway ok I will check the cas as soon as I get home thank a bunch guys tons of help
Reply
Old Jan 28, 2013 | 10:35 AM
  #14  
RXSpeed16's Avatar
Theoretical Tinkerer
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (41)
 
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
Try swapping the two fuel lines going to the fuel rail. They may have gotten crossed during its recent service to the pump and fuel filter. If they are backwards, the injectors won't get fuel.
Reply
Old Jan 28, 2013 | 10:57 AM
  #15  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
Holy crap thanks bud that was it the fuel lines on the pump where backwards. How in the heck do you do that, that is weird lol and there is some punctuation guys lol
Reply
Old Jan 28, 2013 | 11:12 AM
  #16  
RXSpeed16's Avatar
Theoretical Tinkerer
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (41)
 
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
^Holy Crap! A period! This kind of stuff happens. But it's also that's exactly the kind of stuff that makes a lot of people stop taking their cars to other people and do work themselves. Good luck with the car.
Reply
Old Jan 28, 2013 | 11:37 AM
  #17  
alritzer's Avatar
Just cruising
Tenured Member 10 Years
 
Joined: Oct 2004
Posts: 602
Likes: 0
From: Weirton, WV
Originally Posted by RXSpeed16
^Holy Crap! A period! This kind of stuff happens. But it's also that's exactly the kind of stuff that makes a lot of people stop taking their cars to other people and do work themselves. Good luck with the car.


I'm using a phone. Notice the periods. Punctuation isn't that hard. Some people just are too lazy.
Reply
Old Jan 28, 2013 | 12:11 PM
  #18  
RXSpeed16's Avatar
Theoretical Tinkerer
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (41)
 
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
^Gold star work right there! And I agree with you wholeheartedly. Just to clarify, I wasn't saying punctuation was what turns off people, but silly things like the mechanic putting the fuel lines back on backwards.

In general though, if people have to ask questions to clarify what is being said, it's a waste of everyone's time and the problem doesn't get solved. All because someone felt lazy. Not pointing fingers at anyone in particular, just in general.

For example, punctuation is the difference between "I helped my uncle, Jack, off a horse." and "I helped my uncle jack off a horse"
Reply
Old Jan 28, 2013 | 12:21 PM
  #19  
alritzer's Avatar
Just cruising
Tenured Member 10 Years
 
Joined: Oct 2004
Posts: 602
Likes: 0
From: Weirton, WV
Originally Posted by RXSpeed16
^Gold star work right there! And I agree with you wholeheartedly. Just to clarify, I wasn't saying punctuation was what turns off people, but silly things like the mechanic putting the fuel lines back on backwards.


In general though, if people have to ask questions to clarify what is being said, it's a waste of everyone's time and the problem doesn't get solved. All because someone felt lazy. Not pointing fingers at anyone in particular, just in general.

For example, punctuation is the difference between "I helped my uncle, Jack, off a horse." and "I helped my uncle jack off a horse"

Punctuation rules. If you need to read a sentence more than one time, punctuation is needed.
I like your example.
Reply
Old Jan 28, 2013 | 12:36 PM
  #20  
rotaryguy481's Avatar
Thread Starter
Full Member
iTrader: (-2)
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Fort Worth
Yeah I have no idea who he took it to will find out though asap
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
Im faster
General Rotary Tech Support
4
Aug 19, 2015 02:57 PM




All times are GMT -5. The time now is 02:38 AM.