Wiring harness routing for a 1991 N/A [B]URGENT[/B]
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2001
Location: Victoria, BC, Canada
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Wiring harness routing for a 1991 N/A [B]URGENT[/B]
The main harness....especially the piece that contains all of the connections for the solinoids, which route does it take after coming out of the firewall. I took a lot of pictures but neglected to get this routing recorded!
I know that it has to connect to the FI units and the back of the thermostat housing then the solinoids, but no matter the combinations I tried it doesn't quite fit
Anybody out there with a couple of good pictures??
Thanks!
I know that it has to connect to the FI units and the back of the thermostat housing then the solinoids, but no matter the combinations I tried it doesn't quite fit
Anybody out there with a couple of good pictures??
Thanks!
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
It turns left directly at the shock tower (looking from the passenger compartment) and heads between the lower intake and thermostat housing up under the intake. It then connects to the injectors, solenoids, etc.
Thread
Thread Starter
Forum
Replies
Last Post