Wiring harness question!
Thread Starter
Joined: Nov 2001
Posts: 1,034
Likes: 0
From: London, ON
Wiring harness question!
I have an 88 GXL and for some reason or another we cut the wires for the wiring harness not knowing that you could pull it through the fire wall when we were removing the engine. 
Anyways, I could probably splice them back together but I found a 2nd gen GX in the junk yard today (everything was stripped except for under the hood!
) So I was thinking that I could take the wiring harness outa that car and use it in mine. Would that work out okay or do they have different harness' and wires and such?
Thanks
Anyways, I could probably splice them back together but I found a 2nd gen GX in the junk yard today (everything was stripped except for under the hood! ) So I was thinking that I could take the wiring harness outa that car and use it in mine. Would that work out okay or do they have different harness' and wires and such?Thanks
Banned. I got OWNED!!!
Joined: Nov 2001
Posts: 625
Likes: 0
From: charlotte
GX? is that a model?
as long as it is an 86-88 non turbo, then the harness is the same.
I think that there are like 6ish or so connections from the ECU and you can pull em through the firewall. It should work, no problem.
as long as it is an 86-88 non turbo, then the harness is the same.
I think that there are like 6ish or so connections from the ECU and you can pull em through the firewall. It should work, no problem.
Thread Starter
Joined: Nov 2001
Posts: 1,034
Likes: 0
From: London, ON
Yeah on the door, it says "GX" right were mine says "GXL"... Its white with blue interior, if that helps with the model (i dunno)
Coo, thanks, Ill go yank those out
Coo, thanks, Ill go yank those out
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM