wiring harness/injector question
Thread Starter
That looks broken
Joined: Dec 2004
Posts: 654
Likes: 0
From: WA
wiring harness/injector question
this is on a 87 TII harness . . .
do the 2 front and 2 rear injector clips come off the same section or are the primaries and secondaries together? i thought it was the latter but the wire colors aren't jiving with what the FSM says . . .
Thanks
do the 2 front and 2 rear injector clips come off the same section or are the primaries and secondaries together? i thought it was the latter but the wire colors aren't jiving with what the FSM says . . .
Thanks
Passing life by
Joined: Feb 2005
Posts: 4,028
Likes: 2
From: Scotland, USA
Each lead is not a pair. 1 connector from each lead goes to the P and the S injectors. The harness with the O2 sensor clip is the rear housing injectors where the longer wire is the S injector clip.
Thread Starter
That looks broken
Joined: Dec 2004
Posts: 654
Likes: 0
From: WA
sorry i don't really understand what you're saying but since my post above is less than clear let me restate the problem . . .
on the harness there 2 pairs of injector clips. are they paired up as P/S, or as front/rear?
basically the FSM is saying they're paired as F/R but i swear when i pulled them off the primaries were together, as were the secondaries.
Thanks
on the harness there 2 pairs of injector clips. are they paired up as P/S, or as front/rear?
basically the FSM is saying they're paired as F/R but i swear when i pulled them off the primaries were together, as were the secondaries.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM