wiring harness/injector question
 

this is on a 87 TII harness . . .
do the 2 front and 2 rear injector clips come off the same section or are the primaries and secondaries together? i thought it was the latter but the wire colors aren't jiving with what the FSM says . . .
Thanks

Each lead is not a pair. 1 connector from each lead goes to the P and the S injectors. The harness with the O2 sensor clip is the rear housing injectors where the longer wire is the S injector clip.

sorry i don't really understand what you're saying but since my post above is less than clear let me restate the problem . . .

on the harness there 2 pairs of injector clips. are they paired up as P/S, or as front/rear?
basically the FSM is saying they're paired as F/R but i swear when i pulled them off the primaries were together, as were the secondaries.
Thanks

No. They are paird as Front P,S and Rear P,S

awesome thanks for the help and sorry for the confusion

on a side note/question. whartabout a s4 na harness??? same question as above