wiper switch stoped working
#1
Full Member
Thread Starter
Join Date: May 2002
Location: Prince George, BC, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
wiper switch stoped working
hi, my freinds wiper switch just stoped working, he has a 86 with no rear wiper or sun roof, him and I were wondering if there is somthing we could do to fix it.
Thanks
Thanks
#2
Full Member
Join Date: May 2001
Location: Pensacola, FL and Orlando, FL
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
common probelm for rx7s mine doesnt work except on like the second setting. Do a search alot of people have this problem or just buy a used one they are pretty cheap off ebay.
#5
#6
Eats, Sleeps, Dreams Rotary
iTrader: (1)
If you don't want try and repair yourself, "e" mail Joe Romeo-joe@fc3s.org
You'll need to send it to him prepaid (I think $60) to Rancho Cucamonga, Calif. If you choose to do this, DON'T try and repair it yourself first.
You'll need to send it to him prepaid (I think $60) to Rancho Cucamonga, Calif. If you choose to do this, DON'T try and repair it yourself first.
#7
Former Moderator. RIP Icemark.
Originally posted by Rotorific
You can either buy a used one or go to any 2nd gen rx7 site with the FAQ and it will have the fix on there its a resistor that goes bad and all you do is swap it out but you gotta have some soldering skills good luck.
You can either buy a used one or go to any 2nd gen rx7 site with the FAQ and it will have the fix on there its a resistor that goes bad and all you do is swap it out but you gotta have some soldering skills good luck.
The most common problem with the switch is that it looses all settings except the low speed.
Replaceing the relay will solve that. See ted's site for a great write up. http://fc3s-pro.com/TECH/HOWTO/WIPER/wiper.html
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM