2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Window Switch

Thread Tools
 
Search this Thread
 
Old Apr 10, 2008 | 02:50 PM
  #1  
Musada's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 164
Likes: 0
From: Georgia
Window Switch

I have an s5 convertible and having problems with the both the passenger and driver side. On the driver side, I'm missing the switch so I was wondering if i could use any s4-s5 window switch to replace it or does it have to be an s5 vert. The other issue is that my passenger side windows has trouble going up and down. It doesn't go up all the way unless i pull hard on it, And it goes down half way before it halts. How would I resolve this issue? Would spraying WD 40 on the pullys help or is it off track or something?
Reply
Old Apr 10, 2008 | 08:29 PM
  #2  
Musada's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 164
Likes: 0
From: Georgia
anyone?
Reply
Old Apr 10, 2008 | 10:45 PM
  #3  
Turbo II Rotor's Avatar
Who Shot the Sheriff?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 3,858
Likes: 2
From: Aurora, CO
Your sig is HUGE!
Reply
Old Apr 10, 2008 | 10:51 PM
  #4  
greenscar66's Avatar
Junior Member
 
Joined: Apr 2008
Posts: 11
Likes: 0
From: Cambridge, OH
the mechanism is probably getting worn out. it happened to my buddy's FC coupe.

You can probably use parts out of a same-series coupe, I'd think
Reply
Old Apr 11, 2008 | 01:23 AM
  #5  
Musada's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 164
Likes: 0
From: Georgia
thx, any other opinions?
Reply
Old Apr 11, 2008 | 01:27 AM
  #6  
Delicious's Avatar
Banned. I got OWNED!!!
 
Joined: Oct 2007
Posts: 420
Likes: 0
From: Manteca, CA
check ur apex seals
Reply
Old Apr 11, 2008 | 02:08 AM
  #7  
DavidHolmesIII's Avatar
Marvelous Hedonist
Tenured Member: 15 Years
 
Joined: Oct 2007
Posts: 761
Likes: 0
From: Old-Town BrightTown, CO
On a more HELPFUL note. Yes the S4 and S5 switches are interchangable. Although the S4 are far superior to the S5's (internally that is), although they dont have the dimple..woo-hoo. They are cheaper too. The catching windows could be caused by a few things. Take your door panel off, then the plastic sheet, and inspect everything. Clean and lubricate everything. Plug the switch in while everything is exposed and watch the motion of all moving parts to see whats going on. Good luck.

Last edited by DavidHolmesIII; Apr 11, 2008 at 02:13 AM.
Reply
Old Apr 11, 2008 | 02:40 AM
  #8  
94_FD3S's Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2005
Posts: 73
Likes: 0
From: In paradise
it’ll work, i used a s4 driver side switch on my s5 convertible
Reply
Old Apr 11, 2008 | 02:41 AM
  #9  
Delicious's Avatar
Banned. I got OWNED!!!
 
Joined: Oct 2007
Posts: 420
Likes: 0
From: Manteca, CA
i dunno, i had one but it kinda looked like this:
http://youtube.com/watch?v=fbGkxcY7YFU
Reply
Old Apr 11, 2008 | 02:58 AM
  #10  
DavidHolmesIII's Avatar
Marvelous Hedonist
Tenured Member: 15 Years
 
Joined: Oct 2007
Posts: 761
Likes: 0
From: Old-Town BrightTown, CO
Scrappy, some people actually use the search function and hate having to sort through usless, off topic crap like you've been posting, in order to find useful information.
Reply
Old Apr 11, 2008 | 03:01 AM
  #11  
Delicious's Avatar
Banned. I got OWNED!!!
 
Joined: Oct 2007
Posts: 420
Likes: 0
From: Manteca, CA
dude i gotta get my posts up
Reply
Old Apr 11, 2008 | 03:15 AM
  #12  
DavidHolmesIII's Avatar
Marvelous Hedonist
Tenured Member: 15 Years
 
Joined: Oct 2007
Posts: 761
Likes: 0
From: Old-Town BrightTown, CO
Get your posts up in General Automotive, Non-tech/pics, etc. This section is for info. I count on 2nd gen specific for tons of my own research, and **** like this is always getting in the way.
Reply
Old Apr 11, 2008 | 05:43 PM
  #13  
jackhild59's Avatar
Rotary $ > AMG $
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Apr 2005
Posts: 3,785
Likes: 30
From: And the horse he rode in on...
Originally Posted by greenscar66
the mechanism is probably getting worn out. it happened to my buddy's FC coupe.

You can probably use parts out of a same-series coupe, I'd think
Your coupe is not a convertible. Don't give out information if you do not know it to be accurate. These tech posts stay on the forum forever. As DavidHolmesIII says this type of bullshit gets in the way of finding accurate information.

As a new member, you should read and search lots. You shouldn't be answering questions unless you KNOW from your own experience that the answer is true. If you repeat what someone else has written, you may repeat incorrect information.

Help everyone else and help yourself.

Welcome to the board.
Reply
Old Apr 11, 2008 | 05:44 PM
  #14  
jackhild59's Avatar
Rotary $ > AMG $
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Apr 2005
Posts: 3,785
Likes: 30
From: And the horse he rode in on...
Originally Posted by Musada
I have an s5 convertible and having problems with the both the passenger and driver side. On the driver side, I'm missing the switch so I was wondering if i could use any s4-s5 window switch to replace it or does it have to be an s5 vert. The other issue is that my passenger side windows has trouble going up and down. It doesn't go up all the way unless i pull hard on it, And it goes down half way before it halts. How would I resolve this issue? Would spraying WD 40 on the pullys help or is it off track or something?

You can use either an S4 or S5 window switch.

Originally Posted by greenscar66
the mechanism is probably getting worn out. it happened to my buddy's FC coupe.

You can probably use parts out of a same-series coupe, I'd think
Nope you cannot. You cannot adapt the coupe regulator into the vert.

Your cables are probably frayed and broken, the guides are likely broken. The are completely different than the coupes. You can search for a thread that teaches you to rebuild the unit by replacing the cables with Bicycle cables.



This is a very common Vert problem and seems to be more common on the Passenger side.

Good Luck!
Reply
Old Apr 11, 2008 | 08:19 PM
  #15  
Musada's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Jul 2004
Posts: 164
Likes: 0
From: Georgia
Thanx a lot you guys...that helped a lot!
Reply
Old Apr 13, 2008 | 12:39 PM
  #16  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 2
From: Columbus, OH
Originally Posted by DavidHolmesIII
Get your posts up in General Automotive, Non-tech/pics, etc. This section is for info. I count on 2nd gen specific for tons of my own research, and **** like this is always getting in the way.
I know DavidHolmesIII and I don't exactly always get along, but he's 100% right on this one.

While I can see making up to 10 b.s. posts to get your post count up high enough to join the lounge, you REALLY should stop this crap. We don't need you to come into the technical sections and spatter your **** musk all over otherwise useful threads.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Apoc3D
2nd Generation Specific (1986-1992)
10
Sep 5, 2015 10:24 AM




All times are GMT -5. The time now is 10:34 AM.