I read and know that a trubo motor work with an N/A tranny but i was wondering about would a turbo tranny work with a N/A motor?

I was wondering because my tranny if needing rebuild or replacing. I was thinking about getting a jdm motor for 350 and get the driveshaft that mazdatrix has for turbo trannys and N/A rear end.

Also would i use a turbo flywheel on the motor and a turbo clutch?


Just wondering if it would work.

or how much is a will it cost to fix a 5th gear synchro or a clutch fork problem? would i have to rebuild the tranny? i heard its about 900.

 

Not to be a dick, but there are about 1000 threads covering what is needed and what will work when swapping turbo and N/A driveline parts.

To fit a turbo tranny on a N/A Engine, you will need to use the Turbo flywheel (make sure it is from the same series as your N/A Engine), clutch, and starter. You will also need to address the driveshaft issue, because turbo and N/A transmissions are slightly different lengths, and the rear ends are flanged differently. Of course this could be solved by using a Turbo2 driveshaft, rear end and axles, or having a custom driveshaft cut and flanged.