Will These gauges work!?
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland, OR
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Will These gauges work!?
I was wondering will these gauges for for an 87 T2. I was thinking as I was sitting in my car, and looking at the pic, that my cluster is triangular around the oil temp and turbo, and these are circular. Does it really matter?
#2
Lives on the Forum
No, they are for a 1989 - 1991 model.
I don't recommend anyone ******* with their gauges.
The needles have to be pulled, and most likely they will get damaged during that procedure.
-Ted
I don't recommend anyone ******* with their gauges.
The needles have to be pulled, and most likely they will get damaged during that procedure.
-Ted
Trending Topics
#12
Banned. I got OWNED!!!
Join Date: Aug 2006
Location: Comstock Park, MI 49321
Posts: 3,717
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by staticguitar313
Here's mine, i didnt have to pull the needles off.
Picture is a little blurry but they are clean and bright
only problem iis that its terribly hard to see the needles
i wish they lit up
Picture is a little blurry but they are clean and bright
only problem iis that its terribly hard to see the needles
i wish they lit up
ok where did u get those I love those. and do those come with there own lighting switch or did u wire them in?
do they sell them for an 86' n/a
#16
Lives on the Forum
Originally Posted by El Nene 7
well all is required for them to be mounted is removing the stock screws on the gauges, then you slip the GLOW over the needle and thats it put your two screws on . Did that answer your question?
The new overlay just sits on top of everything?
I just looked at the above pic, and it looks like the stock needles are not illuminated anymore?
Or the blue glo just overpowers everything else?
-Ted
#18
Im a tall midget.
iTrader: (28)
Originally Posted by RETed
Okay, so you don't remove the stock gauge faces.
The new overlay just sits on top of everything?
I just looked at the above pic, and it looks like the stock needles are not illuminated anymore?
Or the blue glo just overpowers everything else?
-Ted
The new overlay just sits on top of everything?
I just looked at the above pic, and it looks like the stock needles are not illuminated anymore?
Or the blue glo just overpowers everything else?
-Ted
I've seen these on FCs and they absolutely look like ***. Even on the dimmest setting, they blind you and give lots of glare on the drivers window.
#21
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland, OR
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to buy them just to see how it is! cuz I like the look...... I'm about to paint my car probably darker than a 350z blue, and I want the interior to match the car.... So imma do it! haha!
Hasan
Hasan
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM