Will my ACT Street/Strip hold up to this new setup?
Thread Starter
Haven't we ALL heard this
Joined: Mar 2001
Posts: 3,948
Likes: 1
From: Indiana
Will my ACT Street/Strip hold up to this new setup?
Here is the planned setup -
-TII mild streetport - S4 rotors in new housings
-BNR 3 60-1 Compressor S4 turbine
-Greddy FMIC
-Haltech E6k
-RB Turbo back
I have had the Street/Strip in the car for about 15K. The wear on the clutch disk is really low. The disc is .32" thick. New was .34" and toast is .285. Acorrding to ACT.
My main goal is 300 RWHP.
Will that clutch stand the abuse of drag racing once a month?
I was reading ACT's website maybe I can just used a different disk that would be better? They also said that 330FT LBS is the limit on this clutch. I should be close to that?
Any thoughts?
At least if I have to get a new clutch this one still has ALLOT of life left on it so I can actually sell it.
James
-TII mild streetport - S4 rotors in new housings
-BNR 3 60-1 Compressor S4 turbine
-Greddy FMIC
-Haltech E6k
-RB Turbo back
I have had the Street/Strip in the car for about 15K. The wear on the clutch disk is really low. The disc is .32" thick. New was .34" and toast is .285. Acorrding to ACT.
My main goal is 300 RWHP.
Will that clutch stand the abuse of drag racing once a month?
I was reading ACT's website maybe I can just used a different disk that would be better? They also said that 330FT LBS is the limit on this clutch. I should be close to that?
Any thoughts?
At least if I have to get a new clutch this one still has ALLOT of life left on it so I can actually sell it.
James
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally Posted by Wankel7
Here is the planned setup -
-TII mild streetport - S4 rotors in new housings
-BNR 3 60-1 Compressor S4 turbine
-Greddy FMIC
-Haltech E6k
-RB Turbo back
I have had the Street/Strip in the car for about 15K. The wear on the clutch disk is really low. The disc is .32" thick. New was .34" and toast is .285. Acorrding to ACT.
My main goal is 300 RWHP.
Will that clutch stand the abuse of drag racing once a month?
I was reading ACT's website maybe I can just used a different disk that would be better? They also said that 330FT LBS is the limit on this clutch. I should be close to that?
Any thoughts?
At least if I have to get a new clutch this one still has ALLOT of life left on it so I can actually sell it.
James
-TII mild streetport - S4 rotors in new housings
-BNR 3 60-1 Compressor S4 turbine
-Greddy FMIC
-Haltech E6k
-RB Turbo back
I have had the Street/Strip in the car for about 15K. The wear on the clutch disk is really low. The disc is .32" thick. New was .34" and toast is .285. Acorrding to ACT.
My main goal is 300 RWHP.
Will that clutch stand the abuse of drag racing once a month?
I was reading ACT's website maybe I can just used a different disk that would be better? They also said that 330FT LBS is the limit on this clutch. I should be close to that?
Any thoughts?
At least if I have to get a new clutch this one still has ALLOT of life left on it so I can actually sell it.
James
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM
