Will the 90-96 300ZX TT rims fit on an 88-92 RX-7?
11-21-01, 08:29 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: toronto
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Will the 90-96 300ZX TT rims fit on an 88-92 RX-7?
I have some 300ZXTT rims that I was using on my 87 300zx.
I'm pretty sure that I ran across a pic on the net a while back of a white FC3S RX-7 with the 300 rims on it.
Does any one know if they would fit on an rx-7 - or better yet does any one have any pic's of one with the rims??
I'm pretty sure that I ran across a pic on the net a while back of a white FC3S RX-7 with the 300 rims on it.
Does any one know if they would fit on an rx-7 - or better yet does any one have any pic's of one with the rims??
11-21-01, 08:45 AM
#4
Rotary Enthusiast
Join Date: Apr 2001
Location: North Hollywood, Ca USA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
yes, but not without some modifications on the front. I use the 300zxtt rear wheels(which are wider than the front) on my turbo II race car. the front I had to modify the strut mount geometry and it uses a 1/4" spacer. the rear the wheels fit with no problems. using these wheels allows a wider tire to be used, but the front has very little room so it is not a simple bolt on unless you are using the same size tires as stock.
11-21-01, 09:11 AM
#5
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
My friend tried to put his brother-in-law's 300 ZX rims on his RX-7, and the fronts rubbed the springs. The rears fit ok, but they didn't stick out as much as they do on the 300 ZX.
Thread
Thread Starter
Forum
Replies
Last Post
kkev.7788
2nd Generation Specific (1986-1992)
7
09-02-15 01:32 PM
