2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

electric problem

Thread Tools
 
Search this Thread
 
Old 11-21-01, 03:07 AM
  #1  
wai
RX7 club knows about you

Thread Starter
 
wai's Avatar
 
Join Date: Feb 2001
Location: Honolulu Hawaii <--> Hong Kong
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
electric problem

when my car at idle , the voltage is 12v to 12.7v
when I turn on headlight and step on the brake ,
the voltage will go down to 10.6v ,I don't have any subwoofer and amplifier in my car,and my alternator just replaced 6 months ago, the alternator belt is in good condition and does not loose. so is it normal or not?
Old 11-21-01, 08:37 AM
  #2  
Rotary Enthusiast

 
tims's Avatar
 
Join Date: Apr 2001
Location: North Hollywood, Ca USA
Posts: 1,289
Likes: 0
Received 0 Likes on 0 Posts
no, sounds like the voltage regulator inside the alternator is not working correctly. I would have the alternator checked and possibly replaced. I would also check that all the battery cables are in good condition and are connected tightly.
Old 11-21-01, 10:37 AM
  #3  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Alt is failing.. or bad grounds on engine and battery.

Make sure when you put the new alt in your didn't overtighten the belt. The belt too tight will cause the alt to fail as well, by too much pressure on it.

When the car is running on less than 12.6 volts, you are only running on the battery.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
firzen
2nd Generation Specific (1986-1992)
9
09-15-15 12:04 PM



Quick Reply: electric problem



All times are GMT -5. The time now is 04:18 PM.