wich wire is ground on Pressure Sensor
Rotary Freak
Joined: Oct 2001
Posts: 1,515
Likes: 1
From: Atlanta, GA
on a 1987 tII the ground is the Brown with the Black strip.
The other three wires are Black with white strip, Brown with red strip, and Brown with yellow strip. So if all those wires are the same, then its your Brown with black thats your ground. You can test it with an ohm meter to the negative bat terminal to be sure, although if you have bad grounds, you will read pretty high ohms when doing that.
The other three wires are Black with white strip, Brown with red strip, and Brown with yellow strip. So if all those wires are the same, then its your Brown with black thats your ground. You can test it with an ohm meter to the negative bat terminal to be sure, although if you have bad grounds, you will read pretty high ohms when doing that.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
stickmantijuana
20B Forum
8
Aug 18, 2015 02:46 PM
