Why won't this car run?
Why won't this car run?
The car had flooded out & it wouldn't start...
I checked the oil & it did smell like gas, so I changed the plugs and tried to start it, it fired for about 2-3 seconds before flooding again...I was going to change the oil, so I drained the oil, then I
couldn't get off the oil filter.
What do you guys think is wrong with this car? Someone is selling it by me and this is what he says about it. I can probably have him look at some things if they don't rquire much work.
I checked the oil & it did smell like gas, so I changed the plugs and tried to start it, it fired for about 2-3 seconds before flooding again...I was going to change the oil, so I drained the oil, then I
couldn't get off the oil filter.
What do you guys think is wrong with this car? Someone is selling it by me and this is what he says about it. I can probably have him look at some things if they don't rquire much work.
new injectors will cost you around 2-400 dollars depending on where you buy them. DO NOT get bigger ones. you don't nor will you need them unless you have MAJOR mods. 460cc all around. 
Santiago

Santiago
http://www.nopionline.com/index.cfm?...Valve&vaffid=0
NOPI sells them for $50 a piece. Will those work?
NOPI sells them for $50 a piece. Will those work?
Trending Topics
Open up! Search Warrant!
Joined: May 2002
Posts: 3,838
Likes: 3
From: Kicking down doors in a neighborhood near you
As far as the oil filter coming off, you may need an oil filter wrench. I don't know how beef-cake you are, but if you can't turn it by hand, try a filter wrench of some kind to get more leverage into it.
well if you do decide to get them cleaned check out www.rceng.com
For the oil filter try using a rubber dishwashing glove those give you much more grip. Try that before buying a oil filter wrench if you dont feel like wasting money. And when you put the new oil filter on just hand tighten it.
For the oil filter try using a rubber dishwashing glove those give you much more grip. Try that before buying a oil filter wrench if you dont feel like wasting money. And when you put the new oil filter on just hand tighten it.
Cruzin performance does injector cleaning for very cheap.
And I disagree with the whole new/cleaned injector debate. All the injectors I have had services all flowed as good as a new pair. So why waste the money?
Jarrett
And I disagree with the whole new/cleaned injector debate. All the injectors I have had services all flowed as good as a new pair. So why waste the money?
Jarrett
Originally posted by 1987RX7guy
Some people us their FC's as daily drivers so a week of down time is out of the question.
Some people us their FC's as daily drivers so a week of down time is out of the question.
Jarrett
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM



nopi rox for cheap pricing dude. I have used them three times already in the past year. Go for it.
