First gen man

iTrader: (24)

I have no idea what turbo this is. It came on a Jspec 13bt, and it seems to be completely stock except the compressor housing and wheel.

Anyone know who makes it?

2-N-D-pink

iTrader: (27)

China.

First gen man

iTrader: (24)

hahaha!!


not china!!

nunchuckgun

a different angle might help, the writing is kind of too dark to see, is this your pic or someone elses?

RotaryWeaponSE7EN

iTrader: (6)

closer pics? whats written on it?

nunchuckgun

i can make out what looks like a M or a U followed by 27, then i can see the a/r at the bottom and it looks like .60

2-N-D-pink

iTrader: (27)

we're guessing m27 means nothing. we've searched this before and it turns out theres alot of turbos with this on it.

Z3r0

It kinda resembles my s5 knightsport turbo

nunchuckgun

ebay!

nunchuckgun

pic?

arghx

iTrader: (3)

looks like a T04B style compressor housing

Turbo II Rotor

iTrader: (2)

Is the exhaust housing redrilled for the stock manifold? If not then it is an upgraded stock s5 turbo.

2-N-D-pink

iTrader: (27)

Do you know any specs for this? Or where we can find out?

The turbine housing looks exactly in every way like the stock one, but the compressor housing is much bigger than the stock one.

Turbo II Rotor

iTrader: (2)

Take off the compressor housing and measure the wheel.

93rx74lyfe

iTrader: (1)

Kinda looks like a BNR.

Turblown

iTrader: (12)

Looks like a To4B crammed into a stock turbine housing. Its got a to4 turbine wheel too I think. The shaft and nut look big.

First gen man

iTrader: (24)

It is a stock catridge and turbine.
Just the compressor is different.

Ya everything written on the compressors seems to be on a thousand compressors...

Keep in mind that it came with a jspec, I know most **** that shows up on them is usually pretty routine...

Ill try and get some measurements on it today.

RacerXtreme7

iTrader: (2)

Definately a stock s5 / hybrid. Can't tell from the pic, but it looks like 6 paired inducer blades which means its probly a T04E wheel. It has a T04B compresor housing. Only way to know for sure is to measure the compressor wheel inducer and exducer diameters. You are positive the turbine wheel is stock?? As 1Revvin7 pointed out, the compressor nut looks a bit large.

~Mike..............

First gen man

iTrader: (24)

A little late, but here are some pictures and measurements of the wheel.

arghx

iTrader: (3)

measure all the inducer and exducer measurements for both compressor and turbine and post them up.

RacerXtreme7

iTrader: (2)

What ^he said.

Gringo Grande

iTrader: (97)

Just to sound smarter than I am.

Nice University of Florida color scheme there...LOL. Where are you at?

87 t-66

iTrader: (133)

over a year late lol

Delicious

Garret M27?

Maybe not.