Ryde _Or_Die

Mine didn't come with instructions and I need to know which pipe goes where(they have stickers on them to label them but no paper to tell me anything). I need to know a certain pipe so I can have my BOV flange welded on before I try to do the install. Also if you could tell me how many of what size couplings you had come with it, that would be great. Thanks alot.

cymfc3s

Ok, the arrows depict the airflow. So make sure they are all point the same way. I just moved, and all the car stuff is a huge mess. I have no clue where the instructions are.

fastrotaries

which KIT?

Ryde _Or_Die

Uhh...2 row v-spec.

cymfc3s

here is where i installed the BOV

Ryde _Or_Die

Hey I looked on your site seth and I didn't get the same stuff as you. I only have one adaptor coupling. But I have one more regular coupling than your pic shows. I got 4 bigger couplings, 1 smaller and one that goes from big to small(what size are these anyways? 2.5 and 2.25 or what?).

cymfc3s

ok, heres how my goes:

turbo to BOV-attached outlet pipe: 2" to 2.5 coupling
outlet pipe to 90 degree elbow pipe: 2.5 to 2.5 coupling
elbow pipe to intercooler: 2.5 to 3 coupling

On the outlet of the intercooler all the couplings on the cold side of the intercooler are all 3"

Ryde _Or_Die

Do you have the same kit as me or no? This will be some **** if I don't have enough of the reducers, cause I only have one.

cymfc3s

yah, same kit. ****, i should hope so. Take a look at this pic. This shows the other reducer.

http://www.2751engineering.com/intercoolerinstall_1.jpg

Ryde _Or_Die

So are the reducers the same size or no? If not what size is that one, 2.5-3"? I think I have that one then, maybe I am missing the one that goes onto the turbo. Its 2"-2.5"?

SaabGuy

When I got my fmic kit about 2 weeks ago I drooled all over it..

Then I sort of inventoried everything because it id not come with instructions other than 1 thru 5 with arrows on the pipes.

I thought I was missing that one coupling too. then I realized that the smaller one was pressed inside the larger one. it looked like one unit. had to pull them apart.

Dont worry though. you can get that coupling for under 10 bux and most pepboys.

Ryde _Or_Die

Hey you're right man, it was stuck inside the other one Thanks. I woulda figured it out eventually