Where are the stock oil lines?
Thread Starter
Full Member
Joined: May 2004
Posts: 53
Likes: 0
From: Phoenix AZ
Where are the stock oil lines?
I just bought a 88 t2 with aftermarket t04(not sure which one) and the big oil return is going into the oil pan which I was told isnt stock. Where does it normally go? And if I put a stock turbo back on would I have to get a new oil pan or can I use this on the stocker?
-nick
-nick
Senior Member
Joined: Mar 2002
Posts: 637
Likes: 2
From: San Antonio TX
This one?
Seems like you could still use the oil pan, if you undo the modification for the present turbo. If it was bolted similar to the stock assembly, then just use a couple of short bolts with crush washers. If it was welded...uh...that might be a bit more of a problem, but still do-able.
Seems like you could still use the oil pan, if you undo the modification for the present turbo. If it was bolted similar to the stock assembly, then just use a couple of short bolts with crush washers. If it was welded...uh...that might be a bit more of a problem, but still do-able.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM