bullhead7

where can i get a 54 mm socket for the fly wheel nut i have searched high and low even mazda turned out to be a dead end........please help!

Icemark

sears, snap on

Aaron Cake

iTrader: (1)

Any tool store. Also, 2 1/8" is the same size, which may be easier to find.

RotaryWeaponSE7EN

iTrader: (6)

Ah the memories with that 54mm flywheel nut.

Parastie

DO NOT buy one from Napa, they're way too expensive.

jhammons01

Sears is the best for $23. And you need to look for 2 1/8" rather than MM. Also yo may want to consider this. If you dont have a 3/4" drive ratchet or breaker bar your going to need one of those as well. I know your thinking just buy an adaptor but your 1/2" drive will break under the strain of that Nut. Put those together and you may be better off buying the Mazdatrix special made tool for like $40ish(????).
harbor freight has a kit with large sizes for $30-$50 Can't remember exaclty but more sockets in really big sizes.

Good luck