where can I find this tool?
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Go here: http://www.teamfc3s.org/forum/showth...threadid=29387
What you see are two LEDS bought from RadioShack. They come with the yellow and red wires. YOU have to crimp on a spade connector to each of the two yellow wires and join the two red wires together on a single spade.
The two wires joined to the single spade goes to black/white wire on the connector. Guess where the other two spades go in the three socket connector.
Cost??? Three bucks???
What you see are two LEDS bought from RadioShack. They come with the yellow and red wires. YOU have to crimp on a spade connector to each of the two yellow wires and join the two red wires together on a single spade.
The two wires joined to the single spade goes to black/white wire on the connector. Guess where the other two spades go in the three socket connector.
Cost??? Three bucks???
Last edited by HAILERS; 05-10-04 at 09:47 AM.
#4
Zoom Zoom Boooom
Join Date: Mar 2001
Location: Freakmont, CA
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
It is cheaper to make it your self but if you don't have the time or tools to do so you can buy it at Mazdatrix, http://www.mazdatrix.com/toolmisc.htm
- Dana
- Dana
#5
Full Member
Join Date: Mar 2002
Location: Burlington, NC
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
If you search, there is a thread where I posted a picture of how to make one with a picture of one I made. It's not difficult to make yourself (as evidenced by the fact that I made one successfully.)
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM