2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

What is wrong with my car?

Thread Tools
 
Search this Thread
 
Old Nov 6, 2001 | 07:18 PM
  #1  
jeff88's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 106
Likes: 0
From: Venice, Florida, USA
What is wrong with my car?

I have an 88 NA that is having problems.

The symptoms are many: Eratic idle and idle bounce. Very hard to keep a steady speed - when I let off the throttle it lugs(bucks). Even when I set the cruise it does this. If I am accelerating the car is fine. Also when I am trying to keep a steady speed and let off the throttle a little, though not completely the exhaust sounds strange. It is not loud or popping or backfiring it kinda sounds like a very muffled machine gun. Sorry I can't describe it better.

I guess that is it. I think that the BAC valve is bad because when I unplug it the engine idle does not change. Engine hot or cold makes no difference. Would a bad BAC valve cause these symptoms?

The car has a K&N cone gutted cats-stock muflers--Removed airpump-5th and 6th ports wired open. Wires and plugs are basically new. Other than that it is stock.

Thanks.
Reply
Old Nov 6, 2001 | 09:55 PM
  #2  
ROSHX7's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 455
Likes: 0
From: Surrey, B.C. CANADA
Its most likely your throttle position sensor needs adjustment.
Reply
Old Nov 7, 2001 | 07:40 AM
  #3  
jeff88's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 106
Likes: 0
From: Venice, Florida, USA
How do I do that?
Reply
Old Nov 7, 2001 | 08:03 AM
  #4  
tesla042's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 611
Likes: 0
From: louisville, KY
http://www.k2rd.com/Tech_Info/FC3S_T...O/TPS/tps.html

It may also be a vacuum leak.

Measure the resistance on your BAC.. The specs are in the factory manual...i think it's 9-11 kohm or so.. I'll sell you mine if you want it. It measured 10.8 k-ohm PM me.

-Tesla
Reply
Old Nov 7, 2001 | 11:20 AM
  #5  
jeff88's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 106
Likes: 0
From: Venice, Florida, USA
Thanks.

I'll let you know if I need one.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
highspeedrider
New Member RX-7 Technical
3
Sep 8, 2015 07:55 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
Sep 2, 2015 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM




All times are GMT -5. The time now is 10:27 PM.