What Size Cork To Block Off ACV?
#1
WTB S5 N/A FC
Thread Starter
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
What Size Cork To Block Off ACV?
I am removing my air pump this weekend, and I was wondering what size cork to use to block off the hose to the ACV. Any help?
#2
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
do yourself a favor and remove the acv altogether. get some metal from lowes that is pretty sturdy (~the thickness of a road sign) drill holes in it where the bolts for the acv are and paint it so it wont rust or corrode. if the bolts for the acv are too long you can get a nut that will fit on it, thread it on at a lower point on the screw and tighten it down.
the bolt thing is what i did to switch my s4 fuel rail to an s5
Justin
the bolt thing is what i did to switch my s4 fuel rail to an s5
Justin
#4
WTB S5 N/A FC
Thread Starter
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
Well, I already bought the RB presilencer w/ the tube for the split air pipe, Soooo...If I remove the ACV, I will have a big stupid tube coming off my presilencer, as well as an exhaust leak!!!
#6
WTB S5 N/A FC
Thread Starter
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
In need the car running so I can get it to a shop to weld it shut. Anyone know the diameter of the hose? I guess I will just buy a ****-load of corks, and try em all!
#7
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
ok you dont have to cork it off, jsut get a piece of cloth and put it on the hose using the existing hose clamps
Justin
Justin
Last edited by RX-7Impreza; 03-07-02 at 02:49 PM.
Trending Topics
#10
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Felix Wankel
If you buy the metal to make the ACV plate, you can use a piece of it to block off the spilt air tube too.
If you buy the metal to make the ACV plate, you can use a piece of it to block off the spilt air tube too.
Justin
#12
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rico05
Cool. Anyone have the cork size?
Cool. Anyone have the cork size?
Justin
#15
Super Newbie
It will too, I used to stick a big bolt in the tube to hold me over till I made a block-off plate.
Do it right, just buy a sheet of aluminum from Lowe's and make a block off plate. If you have a jigsaw it takes like 30 minutes total, including pulling the ACV off. Buy a couple small nuts and bolts and make a plate for the split air pipe too. Its a lot easier than it sounds.
Do it right, just buy a sheet of aluminum from Lowe's and make a block off plate. If you have a jigsaw it takes like 30 minutes total, including pulling the ACV off. Buy a couple small nuts and bolts and make a plate for the split air pipe too. Its a lot easier than it sounds.
#16
WTB S5 N/A FC
Thread Starter
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
Peer pressure sucks. Oh, wait, I don't have a jigsaw. Hmmm. I will pick up a ACV plate from k2rd, and try to find some metal to work for the presilencer.
#17
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
i removed my airpump and put cloth over it and i get 0 exhaust coming through, now if he removes the acv then he will get fumes through the pipe going to the cats, yes
Justin
Justin
#18
WTB S5 N/A FC
Thread Starter
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I went to http://www.k2rd.com/Online_Catalog/FC3S/FC3S-index.htm , and looked at the ACV block of plate. $10. But is says it is for the 13BT ACV. Will it work on my car? 91 n/a.
#21
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rico05
I was really talking about corking the tube from the air pump to the ACV. But hey, we shall see what I will do!
I was really talking about corking the tube from the air pump to the ACV. But hey, we shall see what I will do!
Justin
#23
I am the Anti-Ch(rice)t
Join Date: Nov 2001
Location: Savannah, GA
Posts: 1,363
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rico05
Oh...so I am a moron! Thanks RX-7Imprezza! I will get the blockoff plate in the next few days!
Oh...so I am a moron! Thanks RX-7Imprezza! I will get the blockoff plate in the next few days!
what are you talking about, i didnt really offend you did i???
Justin
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM